Product code: ECK-VLA-010villa door
Kalsit Marble-Textured Villa Entrance Door
Kalsit covers the entire leaf in a dark grey marble texture and leaves only a narrow wood-toned band at the left edge. A long chrome bar handle sits inside that band.
- Colour
- Gri
- Door leaf
- Single leaf
- Glazing
- No
- Hardware
- Bar kulp, Krom detay
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The marble texture covers the whole leaf on this model alone in the range; elsewhere it only ever appears as a strip. Because the veining differs on every leaf, no two doors come out looking exactly alike.
The wood-toned band is the composition's one warm note, and its job is to carry the handle. A handle set directly onto the marble texture would, with repeated contact, dull that patch of surface over time.
An unglazed, understated entrance. Glass is wanted on most villa doors, but on a north-facing entrance that gets little daylight its benefit drops off, which is usually why this model gets chosen instead.
- Dark grey marble-textured surface
- Narrow wood-toned vertical band on the left
- Anthracite frame
- Long chrome bar handle
- Unglazed single leaf
- Made to the opening
Attributes
| Item | Value |
|---|---|
| Product code | ECK-VLA-010 |
| Colour | Gri |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Kalsit Marble-Textured Villa Entrance Door?
Kalsit covers the whole leaf in a dark grey marble texture, leaving only a narrow wood-toned band at the left edge to carry a long chrome handle. The veining differs on every leaf, so no two doors from this model come out looking exactly alike.
Can the Kalsit Marble-Textured Villa Entrance Door be made to a custom size?
This model is not produced to a stock size; it is built to the measurement of your own door opening from the outset. The marble-textured surface and wood-toned band are carried through at any width. Measure the opening from inside the frame and send the figures across; we take a further on-site measurement before manufacture.
Which group does the Kalsit Marble-Textured Villa Entrance Door belong to?
Kalsit sits in the villa door group, finished in anthracite with a single, unglazed leaf, a bar handle and chrome detailing. Body, insulation and lock hardware are shared across the group; what changes from one model to the next is the surface finish and the leaf layout. Weigh the choice against the light your entrance gets.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.