Product code: ECK-PVC-031PVC embossed steel door
Küstümotu Broken-Line Wood-Pattern PVC Steel Door
Küstümotu sets two wood-toned forms into an anthracite ground, each bending at a break in its line rather than running straight, with fine grey lines tracing their outline.
- Colour
- Ahşap tonu
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The break in each form reads like movement caught mid-turn. A straight band would sit still; the point where the line bends gives each form a sense of motion, and the two forms end up facing one another.
The grey lines around the forms repeat that same motion a step further out. Without them the wood forms would look stuck flat to the ground; the lines give each one room to sit apart from it.
The two forms are not symmetrical: one sits upper and bends left, the other sits lower and bends right. That asymmetry balances the leaf rather than pulling the composition toward one side.
The direction the forms bend mirrors with which way the door opens. On a right-opening door the upper form bends left; on a left-opening door it bends right, so the movement always runs away from the handle.
- Anthracite PVC facing
- Two broken-line wood forms
- Fine grey outline lines
- Black vertical handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-031 |
| Colour | Ahşap tonu |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What gives the Küstümotu pattern its sense of movement?
Each of the two wood forms on Küstümotu bends at a single break rather than running in a straight line, which reads like motion caught mid-turn, and fine grey lines around them repeat that same bend a step further out. The two forms sit asymmetrically, one upper and one lower, facing each other across the leaf.
Can the Küstümotu door be built to a different door opening?
Yes. The two broken-line wood forms and the fine grey outlines around them are redrawn to match your own opening rather than stretched from a fixed template, so the pattern keeps its proportions at any size. Send the width and height measured inside the frame, and we take the measurement again on site before the leaf is made.
What group is the Küstümotu door part of?
Küstümotu is part of the PVC-embossed steel door group, carrying a wood-toned surface, a PVC facing, an unglazed single leaf and a marble threshold in common with the rest of the range. The surface pattern is what separates one model from another, and here it is a pair of broken-line forms rather than a single pattern or a repeating grid.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.