Product code: ECK-YAN-020fire door
Miğfer Grey Double-Leaf Fire Door with FIRE EXIT Lettering
Miğfer spells out its job directly: large 'FIRE EXIT' lettering sits across the top of both leaves, in grey, so there's no need to interpret a symbol. Writing the words out loud this way suits a building where visitors speak a mix of languages.
- Colour
- Gri
- Door leaf
- Double leaf
- Glazing
- No
- Hardware
- Panik barı
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A pair of vertical bars meets in the centre and releases both leaves at once, so nobody has to push one leaf open before reaching for the second. Grey keeps the overall look calm, the sort of neutral tone a corporate lobby tends to prefer.
Beyond the lettering, neither leaf carries a window or any other opening. Writing the words in large English lettering means a visitor who doesn't share the local language still understands the door immediately, which matters in an airport or shopping centre.
The lettering grows with the leaf, so we build the frame to use your full opening width before sizing the text to match. That combined bar mechanism keeps a crowd moving quickly through a wide opening during an evacuation.
It's built for the kind of high-traffic venue where every second spent reading a sign is a second too many.
- Large 'FIRE EXIT' lettering on both leaves
- Paired vertical panic bars meeting at the centre
- Grey finish
- Unglazed, flat steel surface
Attributes
| Item | Value |
|---|---|
| Product code | ECK-YAN-020 |
| Colour | Gri |
| Door leaf | Double leaf |
| Glazing | No |
| Hardware | Panik barı |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 104 x 208 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 104 x 208 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why does Miğfer use lettering instead of a pictogram?
Miğfer spells the words 'FIRE EXIT' directly across both leaves rather than relying on a symbol, so a visitor who doesn't share the local language still understands the door at a glance. A pair of vertical bars meets at the centre and releases both leaves together, which matters in a busy airport or shopping centre.
Can Miğfer be made to a non-standard size?
Yes. We build the frame to your full opening width and size the lettering to match the finished leaf, keeping the same dual-bar mechanism. Send the opening measured from inside the structural reveal, and we check it again on site before fitting.
Where does Miğfer sit among the other fire door models?
Miğfer sits among the double-leaf models in the fire door range, sharing its body and lock hardware with the group. Its lettered leaves and combined bar release suit a high-traffic, international venue; Nane's pictogram-based double leaf suits a setting where a visual symbol works better than text.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.