Product code: ECK-SIY-009apartment entrance door
Sim Horizontal-Strip Industrial Black Door
Sim takes an industrial line through matt black steel: thin stainless strips cross the leaf in five separate rows, giving the surface a regular, almost technical rhythm, while a wide stainless panel at the centre carries the visual weight of that rhythm.
- Colour
- Siyah
- Hardware
- Gözetleme deliği, Silindir kilit, İnox detay
- Door frame inner size
- 90 x 200 cm
- Architrave outer size
- 108 x 210 cm
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A narrow horizontal groove cut into that central panel doubles as the handle, and a cylinder lock sits above and below it, so the leaf locks at more than one point rather than relying on a single catch.
A viewer at the top is the only other detail on an otherwise plain surface, and a marble-pattern step in front of the door grounds the cool of the stainless strips.
Because the stainless strips throw light back in horizontal lines, Sim sits comfortably against a raw concrete or plaster-finished frontage. On the number of strips, three reads understated and six reads bold; we size the leaf to the width of your own opening either way.
That regularity is also what makes the door recognisable from a distance, before anyone is close enough to see the detail of the strips themselves.
- Five rows of thin horizontal stainless strips
- Wide stainless panel handle at centre
- Double cylinder lock points
- Single viewer
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SIY-009 |
| Colour | Siyah |
| Hardware | Gözetleme deliği, Silindir kilit, İnox detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Sim Horizontal-Strip Industrial Black Door?
Sim crosses matt black steel with thin stainless strips laid out in five separate rows, giving the surface a regular, almost technical rhythm. A wide stainless panel at the centre carries that rhythm's visual weight and doubles as the door's handle.
Can the Sim Horizontal-Strip Industrial Black Door be made to a custom size?
Yes. The leaf and frame are produced to your door opening, with the stainless strips, central panel and marble-pattern step carried through at any width. Measure the opening from inside the frame and send the figures across; our team takes a further on-site measurement before manufacture.
Which group does the Sim Horizontal-Strip Industrial Black Door belong to?
Sim sits in the apartment entrance door group, finished in black with a viewer, cylinder locks and stainless detailing. Body, insulation and lock hardware are shared across the group; what changes from one model to the next is the surface pattern and the leaf layout. Weigh the choice against the light and the frontage it sits against.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.