
Villa Kapısı
Villa Kapısı series steel door: for houses with a garden and villa entrances, across a wide size range and often arranged as a double leaf.
Type
Bağcılar
Bağcılar villa door: a scattering of detached entrances sits outside the dense apartment fabric, measured one by one.

Steel door manufacture, sales, on-site measurement, installation and service across Istanbul.

On-site measurement
The frame opening and the swing direction are settled at your address.

Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.

Checked after installation
Lock and hinge adjustment are checked once the door is in.
The building stock in Bağcılar is mainly apartment buildings, but requests for garden and detached entrances are met here too. On a villa door the double leaf arrangement and the wider sizes are assessed at the address rather than off a list.
At the addresses that sit outside the dense apartment fabric the entrance width and the leaf arrangement are measured on site every time.
A double leaf changes the hinge sum, and that sum is worked out together with the age of the frame.
Both are steel doors, but they work in different conditions. An apartment door stands in a sheltered corridor; a villa door takes the rain, the sun and the wind head on. The split starts there.
| Feature | Apartment steel door | Villa door |
|---|---|---|
| Location | An enclosed corridor, sheltered from the weather | The outer face of the house, open to the weather |
| Surface | Indoor MDF laminate or PVC foil | A UV-resistant panel made for outdoor use |
| Measurement | 90-100 cm standard door frame | 100-220 cm, usually made to measure |
| Water sealing | A single seal is enough | EPDM seal on 4 sides, with a threshold detail |
| Hinge load | Standard leaf weight | A heavy leaf on ball-bearing hinges welded to the door frame |
| Thermal bridge | Of little consequence; both sides are heated | Critical; the door frame needs a thermal break and a guard against condensation |

Villa Kapısı series steel door: for houses with a garden and villa entrances, across a wide size range and often arranged as a double leaf.
Type
The table holds the technical base the four series share: the door skin, the insulation core, the lock system and the certification. The values do not change from one series to the next, so the table states them once. The model you pick for Bağcılar adds surface finish, colour and accessories on top.
| Item | Value | What it means |
|---|---|---|
| Steel body | 2 mm Ereğli A1 steel | The door skin is the same thickness and the same grade across every series. |
| Insulation core | 150 kg/m³ rock wool | Dense rock wool for heat and sound insulation. |
| Lock system | Kale 256G, 14-point | Multi-point locking is standard on every model. |
| Certification | TSE EN 1627 | The standard for resistance to forced entry. |
Inside the boundaries of Bağcılar both the on-site survey and the installation are free. You name the appointment time and the team comes to your address. For addresses outside Istanbul our customer line sets out the terms. The standard warranty covers every model, longer in the upper tier by material.
| Item | Cover |
|---|---|
| Survey and installation within Istanbul | The on-site survey and the installation are free within Istanbul. |
| Outside Istanbul | For an address outside Istanbul, our customer line explains the survey and installation terms on the phone. |
| Service area | Istanbul · European and Anatolian Side |
| Warranty | Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen. |
| Quote | Written up once the measurement has been taken at your address; an item that was not talked through at the survey is not added to it later. |
| Measurement appointment | Tell us the address and a time that suits you, and the door opening is measured there. |
We do. Apartment buildings dominate the district, but the garden and detached entrances outside that fabric get the same measurement and installation service, at no extra cost for being unusual.
No, those are two products. The villa door is the main entrance of the building; the boundary gate is sized and fitted on its own terms. Where an address has both we measure them together and you decide whether to order one or both.
A call or a WhatsApp message with the address is enough. The team comes out, measures the width of the garden entrance and works out the leaf arrangement on the spot, and nothing is charged for that visit.
They are different products. A villa door is built for an entrance that opens off the garden and is fully exposed, so it is wider and often a double leaf, and the facing and hinge material are chosen for weather. An apartment door stands in a sheltered corridor at a fixed size and carries none of those priorities.
No single figure; the leaf count and the width set it. The four series span $480 to $2,700, and wide double leaf entrances usually sit near the top. Warranty is two years as standard, three to five on the upper series, and all four are TSE certified.
The same service pages in neighbouring areas, and this district's other services.
Bağcılar
The marker is the approximate centre point of Bağcılar district, not a depot or shop address.
The map does not load until you click it; nothing goes out to another server while the page opens.
Last updated
The date is the last change date of the content files behind this page; it does not move forward each time the page opens.