Product code: ECK-YAN-016fire door
Fes Red Fire Door with Burgundy Frame
Fes wraps a warm red leaf inside a frame in a deeper burgundy, keeping both tones in the same family while still drawing a clear line between them. A rounded-corner window near the top lets anyone see the escape route beyond before they push through.
- Colour
- Kırmızı
- Glazing
- No
- Hardware
- Panik barı
- Door frame inner size
- 90 x 200 cm
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Black end caps on the bar read as a horizontal line across the red, marking exactly where to push. The burgundy frame sets a firm but related boundary around the brighter red leaf.
Outside the window, the leaf stays flat, with nothing competing with the colour. Keeping red and burgundy in the same family lets the door stand out in a crowded corridor without clashing with the rest of the building.
We build the frame to your opening and match the burgundy to the leaf's red from the same production batch. That close family of tones is what helps a crowd spot this door quickly in a busy corridor.
It fits well wherever a building wants an escape route that's easy to recognise without looking like a warning sign.
- Vertical window with rounded corners
- Horizontal panic bar with black end caps
- Red leaf, dark burgundy frame
- Unglazed lower section
Attributes
| Item | Value |
|---|---|
| Product code | ECK-YAN-016 |
| Colour | Kırmızı |
| Glazing | No |
| Hardware | Panik barı |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 104 x 208 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 104 x 208 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
How does the burgundy frame work with the red leaf on Fes?
Fes keeps the red leaf and the burgundy frame in the same colour family, so the two sit together rather than clashing while still drawing a clear edge between them. A rounded-corner window sits near the top, and the bar's black end caps mark exactly where to push.
Can Fes be made to a non-standard size?
Yes. We build the frame to your opening and match the burgundy to the leaf's red from the same production batch, keeping the window and bar unchanged. Send the opening measured from inside the structural reveal, and it's taken again on site before fitting.
Where does Fes sit among the other fire door models?
Fes sits among the contrast-framed models in the fire door range, sharing its body and hardware with the rest of the group. Its warm, related tones suit a crowded building that wants the door recognised fast without reading as an alarm; Kurşuni's cooler grey-on-anthracite pairing suits a more corporate setting instead.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.