Product code: ECK-PVC-023PVC embossed steel door
Larimar Beige-Ground Line-Cluster PVC Steel Door
Larimar sets a cluster of grey vertical lines into the right side of a beige leaf and leaves the rest of the surface empty.
- Colour
- Bej
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
That empty space is the real design decision here. The line cluster covers only a small part of the surface; the rest carries nothing at all, and the beige tone is left to stand on its own.
Beige sits between white and cream. It shows less dirt than white and does not drift as yellow as cream can, which is why it gets chosen by people who want a light colour without the maintenance that white asks for.
The black handle sits in the middle of the empty area, well away from the lines. The composition ends up with two points of interest, the handle on one side and the lines on the other, each balancing the other.
Which side of the leaf carries the line cluster depends on which way the door opens. It always stays on the hinge side, so the handle side is the one left clear.
- Beige PVC facing
- Grey vertical line cluster on one side
- Large uncovered area
- Black vertical handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-023 |
| Colour | Bej |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why does so much of the Larimar leaf carry no pattern?
On Larimar, the empty area is the design rather than a gap waiting to be filled: the grey line cluster covers only a small part of the leaf, and the beige tone is left to carry the rest of the surface on its own. Beige sits between white and cream, showing less dirt than the one and less yellowing than the other.
Can Larimar be made to measure for my own door opening?
Yes. The beige facing and the grey line cluster on one side are carried through at whatever size your opening calls for, since Larimar is produced against that measurement rather than from a standard run. Send the width and height taken from inside the door frame, and our team checks them again on site ahead of fitting.
What group is the Larimar door part of?
Larimar belongs to the PVC-embossed steel door group, finished in beige with a PVC facing, an unglazed single leaf and a marble threshold common to the range. Every model in the group shares the same body and lock; what differs is the surface treatment, and here that means a small cluster of lines set against a wide, deliberately bare ground.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.