Product code: ECK-PVC-007PVC embossed steel door
Pervin Plain Classic Anthracite PVC Steel Door
Pervin strips the classic layout down to the minimum: one large embossed panel across the leaf and a narrow panel below it, with no further division.
- Colour
- Antrasit
- Surface finish
- PVC
- Surface texture
- Kabartma
- Hardware
- Mermer eşik
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The other classic models in the range build on three or four panels. Cutting that back to two leaves more of the surface open and lets the embossed relief carry the design on its own; in a crowded layout, each panel dulls the effect of the one beside it.
A moulded edge around the large panel is the only decoration here. It sits shallow, so the pattern reads as calm rather than heavy, which suits an entrance that wants a classic look without elaborate detailing.
The dark anthracite tone carries the shadow that the embossing throws. The same restraint on a pale tone would leave the leaf looking almost flat; here the panel only reads because the shadow shows against it.
- Dark anthracite PVC facing
- One large embossed panel
- Narrow embossed panel below
- Corniced frame above
- Black knocker and horizontal handle
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-007 |
| Colour | Antrasit |
| Surface finish | PVC |
| Surface texture | Kabartma |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Pervin Plain Classic Anthracite PVC Steel Door?
Pervin strips the classic layout down to the minimum, with one large embossed panel across the leaf and a narrow panel below it and no further division. The other classic models in the range build on three or four panels; cutting that back to two leaves more of the surface open.
Can the Pervin Plain Classic Anthracite PVC Steel Door be made to a custom size?
Yes. The leaf and both embossed panels are resized to your door opening while the same anthracite facing and moulded edge are kept. Send the width and height measured from inside the frame, and our team takes a further on-site measurement before manufacture to confirm the fit.
Which group does the Pervin Plain Classic Anthracite PVC Steel Door belong to?
Pervin belongs to the PVC embossed steel door group, finished in anthracite with embossed panelling and a marble threshold. Body, insulation and lock hardware are shared across the group; the surface pattern, the facing tone and the leaf layout are what set one model apart from the next. Weigh the light at your entrance and the width of the opening when you choose.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.