Product code: ECK-PVC-011PVC embossed steel door
Dut Two-Panel Walnut PVC Steel Door
Dut divides a walnut surface into two embossed panels: a square field above and a rectangular field below, separated by a plain band set at handle height.
- Colour
- Ceviz
- Surface finish
- PVC
- Surface texture
- Kabartma
- Door leaf
- Single leaf
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A two-panel layout is the simplest version of the classic leaf. Models with three or four panels break the surface up, so the wood grain only ever shows in short stretches; here the panels run wide enough that the grain reads as continuous.
The moulded edge is kept shallow. On a walnut tone that is enough, because the dark surface already holds its own shadow; a deeper profile would only add weight to the leaf.
The black handle sits horizontal, in keeping with the classic layout. A vertical bar on the same leaf would strike a modern note and cut across the horizontal rhythm the panels set up.
The proportion between the two panels is recalculated against the leaf height. On a taller leaf the lower panel grows; an even split on that leaf would read as if it had simply been cut in half.
- Walnut PVC facing
- Square embossed panel above
- Rectangular embossed panel below
- Black horizontal handle
- Single leaf, no glazing
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-011 |
| Colour | Ceviz |
| Surface finish | PVC |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Dut Two-Panel Walnut PVC Steel Door?
Dut divides a walnut surface into two embossed panels, a square field above and a rectangular field below, separated by a plain band set at handle height. A two-panel layout is the simplest version of the classic leaf: models with three or four panels break the wood grain into short stretches.
Can the Dut Two-Panel Walnut PVC Steel Door be made to a custom size?
Yes. The leaf and both embossed panels are resized to your door opening while the walnut facing and the proportion between the two fields are kept consistent. Send the width and height measured from inside the frame, and our team takes a further on-site measurement before manufacture to confirm the fit.
Which group does the Dut Two-Panel Walnut PVC Steel Door belong to?
Dut belongs to the PVC embossed steel door group, finished in walnut with embossed panelling, a single leaf and no glazing, set on a marble threshold. Body, insulation and lock hardware are common across the group; the surface pattern, the facing tone and the leaf layout are what change from one model to the next. Weigh the light at your entrance and the width of the opening before you choose.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.