Product code: ECK-RLC-036luxury steel door
Fitil Abstract Ribbon-Patterned Steel Door
Fitil sets a thin, abstract ribbon, curving softly from top to bottom like a thread of smoke or a flame caught mid-sway, against a warm golden oak ground, giving the door an extremely pared-back composition. The ribbon's thin, unbroken line leaves most of the panel bare, pulling attention toward that single mark.
- Colour
- Ahşap tonu
- Door leaf
- Single leaf
- Glazing
- No
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Cream-coloured breaks mark the line softly against the warm oak without overstating it. Reach for the handle and your hand finds a vertical black bar on the left edge.
A small viewer looks out above. The thin ribbon travels down the warm oak ground in one unbroken curve; Fitil keeps the leaf uncluttered with that single line rather than leaving it bare altogether.
The proportion of the curve is redrawn to match the leaf; on a shorter door we reduce the number of curves, since a tightly packed curve starts to read as a knot rather than a line. That single-line treatment makes this one of the calmest, most restrained designs in the collection.
- Single thin abstract ribbon or flame form
- Curving line falling top to bottom
- Vertical black bar handle
- Golden oak timber-grain ground
- Single leaf, no glazing
Attributes
| Item | Value |
|---|---|
| Product code | ECK-RLC-036 |
| Colour | Ahşap tonu |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Fitil Abstract Ribbon-Patterned Steel Door?
Fitil sets a thin, abstract ribbon, curving softly from top to bottom like a thread of smoke or a flame caught mid-sway, against a warm golden oak ground. The unbroken line leaves most of the panel bare, pulling attention toward that single mark across an otherwise plain surface.
Can the Fitil Abstract Ribbon-Patterned Steel Door be made to a custom size?
Yes. This model is prepared to a standard frame opening as stock. Where your opening differs, the ribbon pattern, the curving line and the black bar handle carry over and the door is produced to your measurement. Send the width and height taken from inside the frame; our team retakes the measurement on site before manufacture.
Which group does the Fitil Abstract Ribbon-Patterned Steel Door belong to?
Fitil sits in the luxury steel door group, finished in black with a single leaf, no glazing and a bar handle. The body, insulation and lock hardware are shared across the group; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.