Product code: ECK-KBT-002luxury steel door
Kemha Carved Walnut Embossed Steel Door
Kemha is the most heavily worked model in the series: an oval carved medallion sits above, an ornamental horizontal band runs through the middle, and an embossed panel fills the lower half. The walnut tone is the ground that carries all three.
- Colour
- Ceviz
- Surface texture
- Kabartma
- Hardware
- Mermer eşik, Krom detay
- Door frame inner size
- 90 x 200 cm
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A surface this dense asks something of the hallway it opens into. In an entrance furnished in a classical style, with walnut and other timber tones already present, the door speaks the same language as the room. In a plainly furnished flat it can dominate and throw the balance off; we do not recommend this model without first seeing the entrance.
The depth of the carving reads through shadow, so landing lighting changes how the door looks. Under good light the full detail of the medallion comes through; under flat light it reads as a plainer surface.
The leaf carries more weight than most in the range, because the depth of the relief adds to the steel sheet behind it. We set the hinge count accordingly: this is one of the few models built with extra hinges beyond the standard count.
- Walnut wood-tone surface
- Oval carved medallion
- Ornamental horizontal centre band
- Embossed lower panel
- Horizontal classic handle with chrome grips
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KBT-002 |
| Colour | Ceviz |
| Surface texture | Kabartma |
| Hardware | Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Kemha model?
Kemha is the most heavily worked door in the range: an oval carved medallion above, an ornamental band through the middle, and an embossed panel below, all set on a walnut-toned surface. A surface this dense needs an entrance that can carry it, ideally one already furnished in warm timber tones.
Can the Kemha door be made to a non-standard opening?
Yes. Kemha is produced to the size of your door opening rather than from a stock run, and the walnut surface, the oval carved medallion and the ornamental centre band are all re-proportioned to the new size rather than simply stretched. We draw the new layout, confirm the opening again on site, and wait for your approval before manufacture starts.
Why does Kemha use extra hinges?
The carved relief adds real weight to the leaf, more than most doors in this range carry. Extra hinges beyond the standard count spread that load more evenly, which keeps the leaf from sagging over years of use. It is a structural answer to a decorative choice, not an upgrade you can opt out of.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.