Product code: ECK-LMK-018Laminoks steel door
Kuşakyolu Diagonal-Split Timber Laminoks Steel Door
Kuşakyolu runs a single diagonal line the full length of its timber facing, splitting it in two; the timber on either side of that line differs in tone and in the direction of its texture.
- Colour
- Ahşap tonu
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The line runs corner to corner, so the two halves are triangles rather than equal rectangles. A vertical or horizontal split would leave two matching shapes; the diagonal makes sure the two sides are never alike.
The tonal difference between the two halves is kept small. Because the two timbers sit close in colour, the leaf reads as one piece from a distance and the diagonal only becomes clear on approach.
The chrome handle follows the angle of the diagonal rather than standing upright. An upright handle would sit awkwardly against this composition, like an element that belongs to a different design.
The direction of the diagonal can run from top left to bottom right, or the other way; the choice is made against the way the door opens, so the line never points against the handle.
- Anthracite Laminoks ground
- Diagonal dividing line
- Two timber tones either side of the line
- Angled chrome bar handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-018 |
| Colour | Ahşap tonu |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Kuşakyolu Diagonal-Split Timber Laminoks Steel Door?
Kuşakyolu runs a single diagonal line corner to corner across its timber facing, splitting it into two triangles with a slightly different tone and grain direction on each side. The diagonal, rather than a vertical or horizontal split, is what keeps the two halves from ever reading as matching shapes.
Can the Kuşakyolu Diagonal-Split Timber Laminoks Steel Door be made to measure?
Kuşakyolu leaves the workshop at a standard frame size as stock. For a different opening, the same diagonal split and two timber tones carry through to a made-to-measure leaf. Send the width and height from inside the frame, noting the opening direction; the opening is checked again on site before fitting.
Which group does the Kuşakyolu Diagonal-Split Timber Laminoks Steel Door belong to?
Kuşakyolu is part of the Laminoks steel door group, in a timber tone with a single unglazed leaf, a bar handle and chrome detailing. Body, insulation and lock hardware stay common across the group, and the facing is the real variable, so weigh it against your landing's light and opening width.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.