Product code: ECK-LMK-001Laminoks steel door
Kuşburnu Diagonal-Panelled Laminoks Steel Door
Kuşburnu cuts a deep red walnut Laminoks facing with diagonal lines. The panels tilt rather than run flat, and each one sits at a slightly different angle from its neighbour.
- Colour
- Ceviz
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A diagonal cut earns its keep on a Laminoks surface because the grain itself runs in one direction; where a line crosses that grain, both become sharper to the eye. The same cut on a plain painted leaf would read as nothing more than a scored line.
Red walnut is the warmest tone in the range. Against a pale landing the door reads as a clear statement; set into a timber-floored hallway it falls into the same family of colour instead. That is exactly why we ask about the landing finish during the survey.
The long black handle sits at the left edge, clear of every panel. None of the diagonal lines run through it, so the composition is not interrupted once the handle is fitted.
- Deep red walnut Laminoks facing
- Diagonal dividing lines
- Division set along the grain
- Long black vertical handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-001 |
| Colour | Ceviz |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Kuşburnu Diagonal-Panelled Laminoks Steel Door?
Kuşburnu cuts a deep red walnut Laminoks facing with diagonal lines, each panel tilted at a slightly different angle. The diagonal works with the grain rather than against it, so the cut and the timber pattern sharpen each other instead of competing for attention.
Can the Kuşburnu Diagonal-Panelled Laminoks Steel Door be made to measure?
This model is prepared to a standard frame opening as a stock size. Where your opening differs, it is made to measure with the same red walnut facing, diagonal lines and black handle kept in place. Send the width and height from inside the frame, and we recheck the opening on site before fitting.
Which group does the Kuşburnu Diagonal-Panelled Laminoks Steel Door belong to?
It sits in the Laminoks steel door group, finished in black with a single unglazed leaf and a long black handle. Body, insulation and lock hardware are shared across the range; what changes is the facing and its layout, so weigh the light on your landing and the width of the opening when choosing.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.