Product code: ECK-LMK-003Laminoks steel door
Mahlep Timber-Banded Laminoks Steel Door
Mahlep sets a vertical timber band into the middle of an anthracite, horizontally lined ground, with a thin black strip running inside the band itself. Three layers sit one over the other.
- Colour
- Ahşap tonu
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.


On-site measurement
The frame opening and the swing direction are settled at your address.

Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.

Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The ground running horizontal against a vertical band is a deliberate contrast. Left alone, the ground would spread the leaf sideways; the moment the vertical band lands, the composition straightens onto a vertical axis and the door pulls itself together.
The black strip inside the timber band splits it in two and gives it depth. Left as one solid run, the band would read like a flat plank; the split turns it into a worked detail instead.
The black handle sits at the left edge, outside the timber band, leaving the centre of the composition free.
The width of the timber band is recalculated against the size of the leaf. On a wide leaf the band widens with it; held at a fixed width it would thin into a stray line and lose the vertical axis it is there to build.
- Anthracite horizontal-line ground
- Central vertical timber band
- Black strip set inside the band
- Black vertical bar handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-003 |
| Colour | Ahşap tonu |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Mahlep Timber-Banded Laminoks Steel Door?
Mahlep runs a vertical timber band through the middle of an anthracite, horizontally lined ground, with a thin black strip splitting the band itself. The horizontal ground and the vertical band pull in opposite directions on purpose, and that tension is what straightens the leaf and holds it together visually.
Can the Mahlep Timber-Banded Laminoks Steel Door be made to measure?
Mahlep is prepared to a standard frame opening as stock. For a different opening, the same anthracite ground, timber band and inner strip are kept and the leaf is made to measure, with the band width recalculated to suit. Pass us the width and height from inside the frame; we confirm the opening again on site before fitting.
Which group does the Mahlep Timber-Banded Laminoks Steel Door belong to?
Mahlep is part of the Laminoks steel door group, in a timber tone with a black bar handle on a single unglazed leaf. Body, insulation and lock hardware are common across the group, and the facing layout is the point of difference, so weigh it against your landing's light and the width of the opening.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.