Product code: ECK-OLC-014luxury steel door
Ladin Walnut Diamond-Patterned Steel Door
Ladin shares its visual language with another model in the range, but here the panel proportions are kept close to square, giving a steadier, more settled look. Two square panels on the walnut-grained surface are filled with a fine, copper-toned diamond pattern, with a round viewer set at their centre.
- Colour
- Ceviz
- Door leaf
- Single leaf
- Glazing
- No
- Hardware
- Bar kulp, Gözetleme deliği
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A horizontal, copper-detailed bar handle sits below the upper panel, with a separate cylinder core beside it. The near-square proportion of the panels makes the door look more settled; paired with the single, unglazed leaf, Ladin is a quiet choice for an apartment building entrance that puts privacy first.
The walnut tone carries a measured warmth, so it does not clash against either a light or a dark entrance. The square proportion holds even as the leaf width changes; on a wider door we add to the walnut margin around the panels rather than stretching them side by side.
Plain but carefully worked, Ladin is a model worth considering for entrances that favour balance over display.
- Fine copper-toned diamond-patterned square panels
- Horizontal copper-detailed bar handle
- Round viewer
- Walnut-grained finish
- Single leaf, no glazing
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OLC-014 |
| Colour | Ceviz |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Gözetleme deliği |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Ladin Walnut Diamond-Patterned Steel Door?
Ladin keeps its panel proportions close to square, giving a steadier, more settled look than other models in the range. Two square panels on the walnut-grained surface are filled with a fine, copper-toned diamond pattern, with a round viewer set at their centre.
Can the Ladin Walnut Diamond-Patterned Steel Door be made to a custom size?
Yes. This model is prepared to a standard frame opening as stock. Where your opening differs, the diamond-patterned panels, the bar handle and the round viewer carry over and the door is produced to your measurement. Send the width and height taken from inside the frame; our team retakes the measurement on site before manufacture.
Which group does the Ladin Walnut Diamond-Patterned Steel Door belong to?
Ladin sits in the luxury steel door group, finished in walnut with a single leaf, no glazing, a bar handle and a viewer. The body, insulation and lock hardware are shared across the group; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.