Product code: ECK-OZP-006one-off project door
Muslin Lattice-Textured Walnut Project Door
Muslin opens a rectangular panel at the centre of a dark walnut surface and fills it with a lattice texture. The panel is bordered by a relief profile.
- Colour
- Ceviz
- Surface texture
- Kabartma
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The lattice texture is the surface's one textured area; the rest of the timber is left flat. That contrast puts the panel forward and marks out the centre of the leaf.
Keeping the texture fine does practical work: handling marks disappear into the texture. On a plain panel the same marks would show directly.
A long chrome handle sits to the left of the panel, clear of the texture. Were the handle to land on the texture itself, hand contact would gradually polish that area of the lattice.
The density of the lattice texture can be varied. A dense texture reads as a matt surface overall, while a sparser one lets the individual squares show through; that choice is made on a sample.
The panel's size is also recalculated to match the leaf dimensions, and the panel always stays centred on the leaf.
- Dark walnut surface
- Lattice-textured rectangular panel
- Relief frame profile
- Long chrome bar handle
- Single leaf, no glazing
- Produced to the opening measurement
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OZP-006 |
| Colour | Ceviz |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Muslin Lattice-Textured Walnut Project Door?
Muslin opens a rectangular panel at the centre of a dark walnut surface and fills it with a lattice texture, bordered by a relief profile. The lattice is the surface's one textured area, with the rest of the timber left flat, which puts the panel forward and marks out the centre of the leaf.
Can the Muslin Lattice-Textured Walnut Project Door be made to a custom size?
This model is not kept to a stock size; it is produced to match the measurement of your door opening. Where your opening is non-standard, the walnut surface, the lattice-textured panel and the relief frame carry over, and the panel is recalculated so it stays centred on the leaf; we check the opening again on site before manufacture, since recentring it afterwards is not practical.
Which group does the Muslin Lattice-Textured Walnut Project Door belong to?
Muslin sits in the one-off project door group, finished in walnut with relief work, a single leaf, no glazing and a bar handle. The body, insulation and lock hardware are shared across the whole catalogue; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.