Product code: ECK-OZP-009one-off project door
Zikzaklı Tilted Quadrilateral-Relief Project Door
Zikzaklı lines up black quadrilateral reliefs on a tilted axis across a walnut surface. The quadrilaterals are not matched in size and do not align with each other; each one sits shifted from the last.
- Colour
- Ceviz
- Surface texture
- Kabartma
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
That shift sets the whole composition on a tilted axis. A straight row of quadrilaterals would sit still; the shifted arrangement gives the leaf a sense of movement and carries the eye from bottom to top.
Black quadrilaterals against a walnut ground make for a contrast rarely seen in the classical range. The same shapes in a timber tone would blend into the surface and the relief would only read through its shadow.
A long chrome handle sits to the left of the quadrilaterals, outside the tilted arrangement. Standing vertical gives the tilted composition an anchor point.
The angle of the shift stays fixed; only the number of quadrilaterals changes. A taller leaf gets one further quadrilateral and the tilted axis continues at the same angle.
- Walnut timber surface
- Black quadrilateral reliefs on a tilted axis
- Panels of varying size
- Long chrome bar handle
- Single leaf, no glazing
- Produced to the opening measurement
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OZP-009 |
| Colour | Ceviz |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Zikzaklı Tilted Quadrilateral-Relief Project Door?
Zikzaklı lines up black quadrilateral reliefs on a tilted axis across a walnut surface. The quadrilaterals vary in size and do not align, each sitting shifted from the last, which sets the whole composition on a tilted axis and gives the leaf a sense of movement.
Can the Zikzaklı Tilted Quadrilateral-Relief Project Door be made to a custom size?
This model is not kept to a stock size; it is produced to match the measurement of your door opening. Where your opening is non-standard, the walnut surface and the tilted quadrilateral reliefs carry over, with a further quadrilateral added on a taller leaf at the same angle, once the opening is confirmed again on site.
Which group does the Zikzaklı Tilted Quadrilateral-Relief Project Door belong to?
Zikzaklı sits in the one-off project door group, finished in black with relief work, a single leaf, no glazing and chrome detailing. The body, insulation and lock hardware are shared across the whole catalogue; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.