Product code: ECK-PVC-006PVC embossed steel door
Nazire Corniced Classic Anthracite PVC Steel Door
Nazire divides a dark anthracite surface into classic embossed panels and finishes the top with a corniced frame, laid out as one large field above and two smaller fields below.
- Colour
- Antrasit
- Surface finish
- PVC
- Surface texture
- Kabartma
- Door leaf
- Single leaf
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The cornice appears on a handful of models in this range and does the same job wherever it appears: it separates the door from the wall and gives it an architectural line of its own. A frame finished flat would leave the same leaf plainer.
Black hardware does not raise the contrast on a dark anthracite surface. Gold or chrome would have turned the hardware into the focal point; kept black, the attention stays on the embossed panels instead.
The proportions of the classic panel layout make the leaf read taller than it is. The large upper field sits above eye level, which draws the eye upward.
- Dark anthracite PVC facing
- Classic embossed panel layout
- Corniced frame above
- Black knocker and horizontal handle
- Single leaf, no glazing
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-006 |
| Colour | Antrasit |
| Surface finish | PVC |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Nazire Corniced Classic Anthracite PVC Steel Door?
Nazire divides a dark anthracite surface into classic embossed panels and finishes the top with a corniced frame, set out as one large field above and two smaller fields below. The cornice appears on a handful of models in the range and always does the same job: it separates the door from the wall.
Can the Nazire Corniced Classic Anthracite PVC Steel Door be made to a custom size?
Yes. The leaf, the embossed panels and the corniced frame are all resized to your door opening while the same anthracite facing and panel layout are kept. Measure the width and height from inside the frame and pass it to us; our team confirms the fit with a further on-site measurement before manufacture begins.
Which group does the Nazire Corniced Classic Anthracite PVC Steel Door belong to?
Nazire belongs to the PVC embossed steel door group, finished in anthracite with embossed panelling, a single leaf, no glazing and a marble threshold. Body, insulation and lock hardware stay the same across the group; the surface pattern, the facing tone and the leaf layout are what separate one model from another. Judge your choice against the light at the entrance and the width of the opening.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.