Product code: ECK-PVC-022PVC embossed steel door
Şebboy Wavy Diamond-Cluster White PVC Steel Door
Şebboy sets a cluster of mahogany-toned diamonds, each with a wavy rather than straight edge, against a white ground ruled with horizontal lines.
- Colour
- Beyaz
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The wavy edge takes the hard geometry out of the diamond shape and pulls the cluster closer to a floral pattern. The same cluster with straight-edged diamonds would read as sharp and technical instead.
White behind mahogany is one of the strongest colour pairings in the line. Ruling the ground in horizontal lines rather than leaving it flat means the white area still carries a texture of its own underneath the cluster.
The cluster sits toward the middle of the leaf and widens to the right. The handle stays on the left, clear of the cluster, so a hand never meets the wavy edges.
The mahogany accent can be swapped for another colour. Anthracite, olive and burgundy clusters are also made against the same white ground; the shape of the cluster stays the same and only the colour changes.
- White horizontal-line ground
- Mahogany-toned diamond cluster
- Wavy-cut diamond edges
- Chrome vertical bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-022 |
| Colour | Beyaz |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What sets the Şebboy pattern apart from the other diamond models in the line?
Şebboy uses a cluster of several mahogany-toned diamonds rather than one, and each diamond has a wavy edge instead of a straight one, which pulls the shape away from strict geometry and closer to a floral pattern. Set against a white, line-ruled ground, it is one of the highest-contrast colour pairings in the range.
Is the Şebboy door available for a non-standard door opening?
Yes. Rather than coming from a fixed stock size, Şebboy is made to your own opening, and the wavy-edged diamond cluster is redrawn at the new scale so the shapes keep their proportions on a wider or narrower leaf. Give us the width and height measured inside the frame and we confirm them again on site before manufacture starts.
Which group does the Şebboy door sit in?
The Şebboy door sits in the PVC-embossed steel door group, carrying a white surface, a PVC facing, an unglazed single leaf and a bar handle shared with the rest of the range. The pattern is what tells one model from another, and here it is a clustered, wavy-edged diamond pattern rather than a single centred shape.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.