Villa Kapısı
Villa Kapısı series steel door: for houses with a garden and villa entrances, across a wide size range and often arranged as a double leaf.
Type
Tuzla
Tuzla Villa Door
Tuzla villa door: garden-fronted detached fabric runs around Orhanlı and Tepeören, away from the shipyards.
Steel door manufacture, sales, on-site measurement, installation and service across Istanbul.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
How Villa Door works
Tuzla also carries garden-fronted detached fabric around Orhanlı and Tepeören. On a villa door the double leaf arrangement and the wider sizes are assessed at the address, against how wide the garden entrance measures.
On the detached entrances near the shore the salt air can shorten a facing's life, and that material decision leads on a villa door.
- On a detached entrance near the shore salt air shortens the life of a finish
- On a villa door the material is therefore decided first
- The garden boundary is measured together with the door
- The leaf layout is built around the width of the entrance
On the shoreline garden entrances the outer surface meets salt air, so the hinge is chosen apart.
The difference between an apartment steel door and a villa door
Both are steel doors, but they work in different conditions. An apartment door stands in a sheltered corridor; a villa door takes the rain, the sun and the wind head on. The split starts there.
| Feature | Apartment steel door | Villa door |
|---|---|---|
| Location | An enclosed corridor, sheltered from the weather | The outer face of the house, open to the weather |
| Surface | Indoor MDF laminate or PVC foil | A UV-resistant panel made for outdoor use |
| Measurement | 90-100 cm standard door frame | 100-220 cm, usually made to measure |
| Water sealing | A single seal is enough | EPDM seal on 4 sides, with a threshold detail |
| Hinge load | Standard leaf weight | A heavy leaf on ball-bearing hinges welded to the door frame |
| Thermal bridge | Of little consequence; both sides are heated | Critical; the door frame needs a thermal break and a guard against condensation |
Series features
Technical specification
The table holds the technical base the four series share: the door skin, the insulation core, the lock system and the certification. The values do not change from one series to the next, so the table states them once. The model you pick for Tuzla adds surface finish, colour and accessories on top.
| Item | Value | What it means |
|---|---|---|
| Steel body | 2 mm Ereğli A1 steel | The door skin is the same thickness and the same grade across every series. |
| Insulation core | 150 kg/m³ rock wool | Dense rock wool for heat and sound insulation. |
| Lock system | Kale 256G, 14-point | Multi-point locking is standard on every model. |
| Certification | TSE EN 1627 | The standard for resistance to forced entry. |
What the service covers
Inside the boundaries of Tuzla both the on-site survey and the installation are free. You name the appointment time and the team comes to your address. For addresses outside Istanbul our customer line sets out the terms. The standard warranty covers every model, longer in the upper tier by material.
| Item | Cover |
|---|---|
| Survey and installation within Istanbul | The on-site survey and the installation are free within Istanbul. |
| Outside Istanbul | For an address outside Istanbul, our customer line explains the survey and installation terms on the phone. |
| Service area | Istanbul · European and Anatolian Side |
| Warranty | Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen. |
| Quote | Written up once the measurement has been taken at your address; an item that was not talked through at the survey is not added to it later. |
| Measurement appointment | Tell us the address and a time that suits you, and the door opening is measured there. |
How Villa Door looks in Tuzla
Tuzla Villa Door: frequently asked
Where in Tuzla are the garden entrances?
Around Orhanlı and Tepeören, away from the shipyard line. Each opening is measured at the address rather than assumed from the area.
Does the villa door order include the boundary gate?
No, they are quoted apart. The villa door is the entrance into the house; the gate at the plot boundary carries its own sizing. Near the shore the gate meets the same salt air as the door, so both are specified with that in mind.
Does the salt air decide the facing?
At the addresses nearest the water it weighs most. Salt bears on an exposed surface constantly along this coast, so we lead with a hard-wearing facing and pick the hinge material to match. A few kilometres inland at Tepeören that pressure drops away.
Is a plant entrance at Aydınlı quoted under this?
No. An industrial entrance is costed on hardware built for goods traffic, which is separate reasoning from a garden entrance of the same width.
What does a villa door cost in Tuzla?
The width and the leaf count decide rather than a list. The range spans $480 to $2,700, with wide garden entrances near the top. A salt-resistant facing shows as its own line in the written quote. All four series share the same body and lock, so the band is set by width and facing alone.
The same service, other areas
The same service pages in neighbouring areas, and this district's other services.
Tuzla Villa Door contact
Tuzla
The marker is the approximate centre point of Tuzla district, not a depot or shop address.
The map does not load until you click it; nothing goes out to another server while the page opens.
- Phone
- 0532 292 23 76
- 0532 292 23 76
- Neighbourhoods we cover
- Akfırat · Anadolu · Aydınlı · Aydıntepe · Cami · Evliya Çelebi · Fatih · İçmeler · İstasyon · Mescit · Mimar Sinan · Orhanlı · Orta · Postane · Şifa · Tepeören · Yayla