
Villa Kapısı
Villa Kapısı series steel door: for houses with a garden and villa entrances, across a wide size range and often arranged as a double leaf.
Type
Pendik
Pendik villa door: the village fabric at Kurtdoğmuş, Emirli and Göçbeyli keeps the garden entrance going.

Steel door manufacture, sales, on-site measurement, installation and service across Istanbul.

On-site measurement
The frame opening and the swing direction are settled at your address.

Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.

Checked after installation
Lock and hinge adjustment are checked once the door is in.
North of Pendik the neighbourhoods at Kurtdoğmuş, Emirli and Göçbeyli carry on the village fabric, and in those houses the entrance opens off the garden. On a villa door the double leaf arrangement and the wider sizes are assessed at the address.
There are similar detached entrances around Harmandere and Sülüntepe as well, and the measurement is taken at each one separately rather than generalised from the building.
Over at Kurtdoğmuş the door opens off the garden into the weather, so the width goes up.
Both are steel doors, but they work in different conditions. An apartment door stands in a sheltered corridor; a villa door takes the rain, the sun and the wind head on. The split starts there.
| Feature | Apartment steel door | Villa door |
|---|---|---|
| Location | An enclosed corridor, sheltered from the weather | The outer face of the house, open to the weather |
| Surface | Indoor MDF laminate or PVC foil | A UV-resistant panel made for outdoor use |
| Measurement | 90-100 cm standard door frame | 100-220 cm, usually made to measure |
| Water sealing | A single seal is enough | EPDM seal on 4 sides, with a threshold detail |
| Hinge load | Standard leaf weight | A heavy leaf on ball-bearing hinges welded to the door frame |
| Thermal bridge | Of little consequence; both sides are heated | Critical; the door frame needs a thermal break and a guard against condensation |

Villa Kapısı series steel door: for houses with a garden and villa entrances, across a wide size range and often arranged as a double leaf.
Type
The table holds the technical base the four series share: the door skin, the insulation core, the lock system and the certification. The values do not change from one series to the next, so the table states them once. The model you pick for Pendik adds surface finish, colour and accessories on top.
| Item | Value | What it means |
|---|---|---|
| Steel body | 2 mm Ereğli A1 steel | The door skin is the same thickness and the same grade across every series. |
| Insulation core | 150 kg/m³ rock wool | Dense rock wool for heat and sound insulation. |
| Lock system | Kale 256G, 14-point | Multi-point locking is standard on every model. |
| Certification | TSE EN 1627 | The standard for resistance to forced entry. |
Inside the boundaries of Pendik both the on-site survey and the installation are free. You name the appointment time and the team comes to your address. For addresses outside Istanbul our customer line sets out the terms. The standard warranty covers every model, longer in the upper tier by material.
| Item | Cover |
|---|---|
| Survey and installation within Istanbul | The on-site survey and the installation are free within Istanbul. |
| Outside Istanbul | For an address outside Istanbul, our customer line explains the survey and installation terms on the phone. |
| Service area | Istanbul · European and Anatolian Side |
| Warranty | Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen. |
| Quote | Written up once the measurement has been taken at your address; an item that was not talked through at the survey is not added to it later. |
| Measurement appointment | Tell us the address and a time that suits you, and the door opening is measured there. |
In the northern village neighbourhoods, Kurtdoğmuş, Emirli and Göçbeyli, and around Harmandere and Sülüntepe as well. Each one is measured separately, since no two of these plots were laid out alike.
No, they are two separate products. The villa door is the main entrance of the house; the boundary gate has its own sizing and hardware. In the northern villages nearly every plot has both, so one visit covers the measuring for each.
More often than not. These openings were built to the house rather than a standard, so once the width is measured a double leaf frequently turns out to be the better arrangement. The hinge sum is then worked from the weight of the two leaves rather than one.
Near Esenyalı and Güzelyalı it does. Damp off the water shortens the life of an exposed surface, so we lead with a facing chosen for that at those addresses.
The width and the leaf count decide rather than a list. The range spans $480 to $2,700, with wide village entrances near the top. The survey is free and the figure is written after the measurement. Where a damp-resistant facing is chosen near the shore, that choice appears as its own line.
The same service pages in neighbouring areas, and this district's other services.
Pendik
The marker is the approximate centre point of Pendik district, not a depot or shop address.
The map does not load until you click it; nothing goes out to another server while the page opens.
Last updated
The date is the last change date of the content files behind this page; it does not move forward each time the page opens.