Product code: ECK-PVT-010pivot door
Andezit Horizontal-Grain Walnut Pivot Door
On Andezit the grain runs horizontally and without a break across the whole leaf. That visually stretches an already wide door further still, which is useful on a low, broad facade where the proportion needs completing rather than exaggerating.
- Colour
- Ceviz
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A vertical grain in the same spot would have made the same door look narrower. The walnut tone sets up a contrast against a grey facade without clashing with it, since neither colour is fully saturated and the entrance stays calm as a result.
Narrow panes frame the leaf on each side. They are kept deliberately slim on this model: a wider pane would have broken the continuity of the horizontal grain running across.
Because the leaf is wide and heavy, the spindle's load capacity is specified well above the leaf's actual weight. A system chosen at the limit starts to struggle within the first year, and the door creaks as it turns.
- Unbroken horizontal-grain facing
- Narrow full-height glazing on each side
- Bronze-toned bar handle
- Exterior-grade facing
- Increased spindle capacity for a wide leaf
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-010 |
| Colour | Ceviz |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Andezit model?
Andezit runs a walnut grain horizontally and without a break across the whole leaf, which stretches an already wide door further and suits a low, broad facade. The same leaf with a vertical grain would have looked narrower in the same spot.
Can Andezit be built to a non-standard opening?
Yes, Andezit is made to order rather than from a stocked size, and the walnut facing keeps its horizontal grain running unbroken across whatever width the leaf ends up at. We confirm the opening again on site, and the spindle capacity is then set with a margin above the weight of the leaf that results, rather than to a fixed figure.
Why does a wide walnut leaf need a stronger spindle?
A leaf this wide and heavy puts more load on the spindle than an average door does, so the capacity is specified with a clear margin above the leaf's actual weight rather than to the minimum. A system picked at the limit starts to strain within the first year, and the door creaks as it turns.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.