Product code: ECK-PVT-011pivot door
Terazi Light-Tone Internal Pivot Door
Terazi is not an external door. It is built for internal openings, between a living room and a hallway, a study and a corridor, and that changes the priorities: withstanding the weather drops away, and turning quietly and evenly becomes the thing that matters.
- Colour
- Siyah
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A plain pale surface in a light beige sits in the same register as the wall around it and lets the door fade into the background. Closed, the opening is almost invisible; only a slim black bar handle marks where it is.
Floor preparation is still a live question indoors. The bottom spindle sits recessed into the floor, so the screed thickness, and whether underfloor heating pipework runs beneath it, has to be known beforehand.
In a room with underfloor heating, the spindle position is planned around where the pipework does not run, which can mean shifting the door's position by a small amount; that is settled at the design stage, not afterwards.
- Plain matt surface for interior use
- Slim black bar handle
- Unglazed leaf
- Spindle recessed into the floor
- Optional sound insulation
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-011 |
| Colour | Siyah |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Terazi model?
Terazi is an internal pivot door, built for openings like the one between a living room and a hallway rather than an entrance to the outside. Withstanding weather is not the priority here; turning quietly and evenly is, and a plain pale surface lets the door fade into the wall around it.
Is Terazi made to the size of my own opening?
Yes, this internal leaf is produced to order rather than from a stocked size, and the plain pale surface carries over unchanged whatever width or height the opening calls for. The bottom spindle still needs to be recessed into the floor, so the screed depth and the opening are both checked again on site before manufacture.
How does underfloor heating affect where a Terazi door is installed?
The spindle position has to avoid the heating pipework running beneath the floor, which can mean shifting the door's position by a small amount from where it might otherwise sit. That decision belongs at the design stage, before the floor goes down, not as a fix once the room is finished.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.