Product code: ECK-PVT-016pivot door
Mil Wide Oak-Leaf Internal Pivot Door
Mil is built to make an internal opening look less like a door and more like a moving section of the wall. A hidden door frame means no frame shows when the leaf is closed; what is left is the oak surface and a recessed lever.
- Colour
- Ahşap tonu
- Hardware
- Gömme kol
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A wide leaf indoors raises a different problem than it does outside: balance. Opening it sends half the leaf into one room and half into the other, and both sides need clear space to make that work.
Furniture layout is planned around that fact. Floor preparation is the deciding factor here too.
In a room with underfloor heating, the bottom spindle has to sit where the pipework does not run, which can mean shifting the door's position by a few centimetres. That has to be settled during the shell-and-core stage of construction; moving it afterwards is not straightforward.
- Wide internal leaf
- Hidden door frame for a frameless look
- Recessed lever
- Spindle recessed into the floor
- Spindle position planned around underfloor heating
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-016 |
| Colour | Ahşap tonu |
| Hardware | Gömme kol |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Mil model?
Mil is designed to read as a moving section of wall rather than a door, using a hidden door frame so nothing shows around the leaf when it is closed. Only the oak surface and a recessed lever remain visible, with no frame line to break up the wall.
Is the Mil door made to the size of my own opening?
Yes, this internal leaf is produced to order rather than from a stocked size, and the hidden door frame is built around your own opening so no frame line shows once it is fitted. The spindle position still needs to clear any underfloor heating pipework, which is planned at the shell-and-core stage; we confirm the opening again on site before the hidden frame is built.
How does underfloor heating affect the installation of the Mil door?
The bottom spindle needs to sit clear of the heating pipework running beneath the floor, which can mean shifting the door's position by a few centimetres from where it might otherwise go. That decision has to be made during the shell-and-core stage of construction, since moving it once the floor is finished is not straightforward.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.