Product code: ECK-PVT-013pivot door
Menzil Wide-Leaf Light Wood-Tone Pivot Door
Menzil shows what a light-toned leaf does set against a dark facade. Against a near-black vertical-slat facade, a wide, light-wood leaf marks out the entrance on its own; nothing else on the elevation has to work to draw the eye there.
- Colour
- Ahşap tonu
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The leaf is wide and fully unglazed. That width is the whole reason a pivot system is used here: a hinged door of the same width would put more load on its hinge points than they could carry.
On a pivot leaf the weight runs straight down into the floor instead. The practical consequence of a wide leaf is that clear space has to be allowed in front of and behind it.
As it opens, part of the leaf swings outward and part swings in. This model will not work in a narrow hallway, or one with a wall directly behind the opening; it is one of the first things we check at the on-site survey.
- Wide unglazed leaf
- Light wood-tone facing
- Contrast against a dark facade
- Vertical bar handle
- Increased spindle capacity
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-013 |
| Colour | Ahşap tonu |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Menzil model?
Menzil is a wide, light wood-toned leaf set against a near-black slat facade, built to mark the entrance on its own without any other accent on the elevation. The width is only possible because it turns on a spindle rather than hinges.
Is Menzil available for a non-standard opening?
Yes, Menzil is produced to order rather than from a stocked size, and the light wood-tone facing keeps its contrast against a darker surround whatever width the leaf is made to. Because a wider leaf of this kind carries more weight, the spindle capacity is set with a margin above what the resulting leaf will weigh.
What space does the Menzil door need around it to open?
As the leaf swings, part of it moves outward and part moves inward, so clear space is needed on both sides of the opening, not just in front. It will not suit a narrow hallway or an opening with a wall directly behind it, which is one of the first things checked at the on-site survey.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.