Product code: ECK-PVC-021PVC embossed steel door
Çentikli Stepped-Line Anthracite PVC Steel Door
Çentikli lines up black horizontal lines of differing lengths across an anthracite surface; the ends of the lines fall out of step and trace a slanted edge down one side.
- Colour
- Antrasit
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Stepping the lines makes the pattern read like a staircase. Lines of equal length would sit as a flat, even texture; the uneven endings make each line stand out on its own.
The slanted edge draws the eye toward that side of the leaf. Because the pattern is not symmetrical, the composition does not resolve in a single glance; the eye has to follow the line of the steps.
The chrome handle stands on the side where the lines run short. Placed among the longer lines, it would get lost inside the pattern.
The length of each step is not set to a mathematical sequence; it is set by eye. A regular, evenly increasing step would make the pattern feel mechanical, and the irregularity here is the composition itself.
- Anthracite PVC facing
- Stepped-length horizontal lines
- Slanted edge along the stepping
- Chrome vertical bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-021 |
| Colour | Antrasit |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What pattern does the Çentikli door carry?
Çentikli lines up black horizontal lines of differing lengths across an anthracite surface, and because the ends fall out of step with one another, they trace a slanted edge down one side of the leaf rather than sitting as an even texture.
Can the stepped line pattern be adapted to a different door size?
Yes, the leaf is made against your own door opening and the stepping of the lines is set out again by eye at the new size, because the irregular step pattern is drawn to suit the proportions of the leaf rather than following a fixed formula. Send the opening measured from inside the frame and we take a further measurement on site.
What group does the Çentikli door belong to?
Çentikli stands in the PVC-embossed steel door group, finished in anthracite with a PVC facing, an unglazed single leaf and a bar handle, features it shares with every model in the range. What changes from door to door is the surface pattern, and here it is a staggered run of lines rather than a single pattern or a repeating grid.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.