Product code: ECK-LMK-010Laminoks steel door
Çintemani Diamond-Pattern Laminoks Steel Door
Çintemani gathers a cluster of diamond shapes into the middle of an anthracite, horizontally lined ground. Some of the diamonds sit in timber, others in the same tone as the ground itself.
- Colour
- Antrasit
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The cluster is not symmetrical; the diamonds crowd toward one end and thin out toward the other. That drift gives the leaf direction, carrying the eye from one side to the other, where a centred cluster would simply sit still.
Mixing timber diamonds with ground-toned ones keeps the pattern from flattening into a single block. If every diamond were timber the cluster would read as one solid patch; the shift in tone lets each diamond stand apart.
The horizontal lines of the ground continue underneath the cluster, so the texture does not stop where the pattern ends; it runs on behind it.
The number of diamonds in the cluster changes with the height of the leaf. A taller leaf gains an extra diamond, so the density of the pattern holds and the cluster never looks stretched thin.
- Anthracite horizontal-line ground
- Timber and anthracite diamond shapes
- Clustered, asymmetric layout
- Black vertical bar handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-010 |
| Colour | Antrasit |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Çintemani Diamond-Pattern Laminoks Steel Door?
Çintemani clusters diamond shapes into the middle of an anthracite, horizontally lined ground, mixing timber-toned diamonds with ones that match the ground. The cluster is not symmetrical; it crowds toward one end, and that drift carries the eye across the leaf instead of leaving it to sit still in the centre.
Can the Çintemani Diamond-Pattern Laminoks Steel Door be made to measure?
Çintemani leaves the workshop at a standard frame size as stock. Where your opening is a different size, the same ground, diamond mix and clustered layout carry through to a made-to-measure leaf, with the diamond count adjusted to suit the height. Send the width and height from inside the frame; the opening is confirmed again on site before fitting.
Which group does the Çintemani Diamond-Pattern Laminoks Steel Door belong to?
Çintemani is part of the Laminoks steel door group, in anthracite with a single unglazed leaf and a black bar handle. Body, insulation and lock hardware stay common across the group, and the facing is what separates one model from another, so weigh the light on your landing before deciding.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.