Product code: ECK-LMK-014Laminoks steel door
Zirve Triangular-Top Timber Panel Laminoks Steel Door
Zirve leaves the top edge of its timber panel anything but flat: the panel ends in a run of triangular peaks that meet the anthracite ground along a zigzag line instead of a straight one.
- Colour
- Ahşap tonu
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
On the rest of the range, timber meets anthracite along a plain straight edge. Here that boundary becomes the pattern in its own right, so there is no need for a separate design elsewhere on the leaf; the one event in the composition is the way the two materials come together.
The ground's vertical line texture reinforces the direction of the peaks. A horizontally lined ground would cut across the triangles and blunt the effect.
A round grip sits beside the handle. Together they suit entrances where the door is both pulled and pushed in daily use.
The number of triangular peaks changes with the width of the leaf. A narrower leaf carries fewer, larger peaks, so the proportion holds and the zigzag never bunches up.
Without that adjustment, a narrow leaf would crowd the pattern and the zigzag would look cramped instead of deliberate.
- Anthracite vertical-line ground
- Timber panel with triangular top edge
- Zigzag boundary between panel and ground
- Black bar handle with round grip
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-014 |
| Colour | Ahşap tonu |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Zirve Triangular-Top Timber Panel Laminoks Steel Door?
Zirve shapes the top edge of its timber panel into a run of triangular peaks, meeting the anthracite ground along a zigzag line rather than a straight one. Elsewhere in the range that boundary is plain, so here it becomes the one pattern on the leaf, with no separate feature needed.
Can the Zirve Triangular-Top Timber Panel Laminoks Steel Door be made to measure?
Zirve leaves the workshop at a standard frame size as stock. For a different opening, the same anthracite ground and triangular-top panel carry over into a made-to-measure leaf, with the number of peaks adjusted to the width. Send the width and height from inside the frame; the opening is checked again on site before fitting.
Which group does the Zirve Triangular-Top Timber Panel Laminoks Steel Door belong to?
Zirve is part of the Laminoks steel door group, in a timber tone with a single unglazed leaf, a bar handle and a round grip. Body, insulation and lock hardware stay common across the group, and the facing is the real difference, so weigh it against the light your landing gets.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.