Product code: ECK-PVC-017PVC embossed steel door
Zirkon Wavy-Edged Wood-Pattern PVC Steel Door
Zirkon sets a wood-toned triangle against an anthracite ground ruled with horizontal lines; one side of the triangle is not straight but cut into a wave.
- Colour
- Ahşap tonu
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The wavy edge turns a geometric shape into something closer to organic. A triangle with three straight sides would sit rigid in the same spot; breaking one edge softens the shape and gives the composition a sense of movement.
Beside the triangle sits a smaller wood-toned piece that reads as if it had broken away from the main shape. Drop that piece and the triangle would stand alone and look unbalanced; with it, the composition settles.
Because the ground is ruled in horizontal lines rather than left plain, the corners of the triangle stand out sharply. On a plain ground the same shape would look stuck to the surface, and the corners would barely read.
How far the wavy edge swings can be adjusted. A deeper wave pulls the shape toward the organic; a shallow one keeps it close to geometry, and we size it against the width of the leaf.
- Anthracite horizontal-line ground
- Wavy-edged wood-toned triangle
- Detached companion piece in wood tone
- Chrome vertical bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-017 |
| Colour | Ahşap tonu |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What does the Zirkon door look like?
Zirkon sets a wood-toned triangle against an anthracite ground ruled with horizontal lines, with one side of the triangle cut into a wave rather than left straight. The wave softens what would otherwise be a rigid geometric shape, and a smaller detached piece beside the triangle keeps the composition from reading as unbalanced.
Is the Zirkon door available for a non-standard door opening?
Yes. The leaf and frame are set out from your own opening, and the triangle and its companion piece are redrawn to the new proportions rather than stretched, because the wave in the edge only reads correctly at the right scale. Send us the measurements from inside the frame and we check them again on site before fitting.
Which group does the Zirkon door sit in?
The Zirkon door sits in the PVC-embossed steel door group, finished in a wood tone with a PVC facing, an unglazed single leaf and a bar handle. These features are shared across the group; the difference between models lies in the surface pattern, and here that means a wavy-edged triangle rather than a repeating line or diamond layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.