Product code: ECK-PVC-014PVC embossed steel door
Porsuk Vertical-Slat Walnut PVC Steel Door
Porsuk works a walnut surface in fine vertical slats from top to bottom, with no further division across the leaf.
- Colour
- Ceviz
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
How fine and how closely set the slats are decides how the leaf reads. Thicker, wider-set slats would break the surface up; at this scale, the leaf reads as one continuous texture from a distance and as separate lines up close.
That texture earns its keep day to day: light scuffs disappear into the gaps between the slats. On a flat walnut surface, the same marks would show directly.
The long chrome handle stands vertical over the slats, running in the same direction as them. A horizontal handle would cut across the texture and break the vertical flow of the leaf.
How closely the slats are set can be changed. Wider spacing lets the wood grain show through; tighter spacing reads as one continuous texture. That choice is made against a sample rather than from a drawing.
A square rosette is available in place of the round one shown here.
- Walnut PVC facing
- Fine vertical-slat texture
- Round rosette
- Long chrome bar handle
- Single leaf, no glazing
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-014 |
| Colour | Ceviz |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Porsuk Vertical-Slat Walnut PVC Steel Door?
Porsuk works a walnut surface in fine vertical slats from top to bottom, with no further division across the leaf. How fine and how closely set the slats are decides how the leaf reads: at this scale it appears as one continuous texture from a distance and as separate lines up close.
Can the Porsuk Vertical-Slat Walnut PVC Steel Door be made to a custom size?
Yes. The leaf is resized to your door opening while the walnut facing, the vertical-slat texture and the chrome bar handle keep the same layout. Measure the width and height from inside the frame and send it to us; our team confirms the fit with a further on-site measurement before manufacture.
Which group does the Porsuk Vertical-Slat Walnut PVC Steel Door belong to?
Porsuk belongs to the PVC embossed steel door group, finished in walnut with a single leaf, no glazing and a bar handle. Body, insulation and lock hardware are shared across the whole group; the surface pattern, the facing tone and the leaf layout are what set one model apart from another. Weigh the light at your entrance and the width of the opening before deciding.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.