Product code: ECK-PVT-007pivot door
Eşik Brushed Stainless Pivot Door
Eşik shows what the surface looks like when the material itself is left to speak: a stainless sheet, brushed vertically, that scatters light rather than reflecting it directly.
- Hardware
- Bar kulp, İnox detay
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
That is why the door reads as a soft metal surface rather than a mirror, and sits comfortably next to a timber facade instead of fighting it. The direction of the brushing matters: brushed vertically, it draws the eye up the height of the leaf; brushed horizontally, it would widen the leaf instead.
On this model the direction was chosen deliberately as vertical. Fingerprints are the most common complaint on a stainless surface.
A surface treatment on this model cuts that down, though nothing removes it completely; day-to-day care still calls for a soft cloth. On installations close to the coast, every fitting on the door is specified in stainless.
- Vertically brushed stainless surface
- Fingerprint-resistant surface treatment
- Full-height bar handle
- Unglazed leaf
- Coast-grade stainless fittings
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-007 |
| Hardware | Bar kulp, İnox detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Eşik model?
Eşik is finished in vertically brushed stainless steel, a surface that scatters light instead of reflecting it as a mirror-polished panel does. That gives the door a soft metal look rather than a glossy one, which sits well next to a timber facade. The brushing runs vertically on purpose, drawing the eye up the leaf's height.
Can the Eşik door be built to a non-standard opening?
Yes. Eşik is made to order rather than taken from stock, and the vertically brushed stainless surface keeps running the same way up the leaf whatever height the opening calls for. We check the opening again on site, and the spindle is sized to carry the stainless leaf that results; coast-grade fittings are specified the same way regardless of size.
Which group does the Eşik door belong to?
Eşik is a pivot door, built with a bar handle and stainless detailing rather than a patterned or coloured facing. The body, insulation and lock hardware follow the same standard across the range; what sets this model apart is letting the raw metal surface carry the entrance on its own. Think about the light your landing gets, and the width of the opening, before settling on a finish this plain.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.