Product code: ECK-LZR-001luxury steel door
Kalemişi Triangle-Patterned Laser-Etched Steel Door
Kalemişi splits the leaf into two panels: a timber-toned vertical band on the left, and laser-etched triangles on an anthracite ground on the right.
- Colour
- Antrasit
- Surface texture
- Lazer çizim
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The triangles are not spread evenly; they sit dense along the lower edge and thin out as they climb. That change in density makes the leaf read taller than it is and draws the eye upward, which is why fitters reach for this model under a low landing ceiling.
The laser etching does not cut into the surface, it works on top of it, so the pattern shows while the leaf stays structurally whole. The line between the timber band and the anthracite ground is kept sharp, so the two materials never blur together.
How deep the laser etching runs is a setting we can adjust. A deeper etch makes the pattern stand out more clearly but thins the surface finish, so that choice is kept off entrance doors and stays available only on internal room doors.
The density of the triangles can also shift from one project to the next. A sparser spread calms the leaf down, and we show that on a sample before the measurement is taken.
- Two-tone anthracite-and-timber panels
- Laser pattern thinning from dense to sparse triangles
- Vertical black bar handle
- Single leaf, no glazing
- Two-tone surface
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LZR-001 |
| Colour | Antrasit |
| Surface texture | Lazer çizim |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Kalemişi Triangle-Patterned Laser-Etched Steel Door?
Kalemişi splits the leaf into two panels, a timber-toned band on the left and laser-etched triangles on an anthracite ground on the right. The triangles sit dense along the lower edge and thin out as they climb, which draws the eye upward and reads taller under a low landing ceiling.
Can the Kalemişi Triangle-Patterned Laser-Etched Steel Door be made to a custom size?
Yes. The leaf and frame are produced to match your door opening, with the same two-tone panels, the laser-etched triangle pattern and the bar handle carried through at any size. Measure the opening from inside the frame and send us the width and height; our team takes a further on-site measurement before manufacture.
Which group does the Kalemişi Triangle-Patterned Laser-Etched Steel Door belong to?
Kalemişi sits in the luxury steel door group, finished in anthracite with laser etching, a single leaf, no glazing and a bar handle. The body, insulation and lock hardware are shared across the group; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.