Product code: ECK-KOM-007composite steel door
Kavak Composite Door with a Geometric Cut-Pattern Handle
Kavak sets a honey-toned, vertically grained surface against a black band that splits the panel in two, and the band carries a geometric handle built from interlocking rectangular lines; it's the leaf's one standout decorative detail.
- Colour
- Ahşap tonu
- Surface finish
- Kompozit
- Hardware
- Silindir kilit
- Door frame inner size
- 90 x 200 cm
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Above the band sits a small viewer for looking out; below it, a second cylinder lock. Because the handle rests directly on the band, the two don't read as a handle bolted on afterwards, they come across as a single detail.
The height of the band is set against the leaf, since the handle has to stay at a fixed working height: on a taller leaf the band stays put and the timber section above it lengthens instead. Because the honey-coloured vertical grain is interrupted above and below the band, the leaf reads as one surface split in two rather than two separate surfaces joined together.
The vertically grained surface has no recess for marks to settle into, so wiping it down once a month is enough to keep it looking right.
- Geometric cut-pattern handle of interlocking rectangular lines
- Black horizontal band across the middle
- Vertical timber-grain ground
- Twin cylinder locks
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KOM-007 |
| Colour | Ahşap tonu |
| Surface finish | Kompozit |
| Hardware | Silindir kilit |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What's the standout feature on Kavak?
The handle. It's built from interlocking rectangular lines in a geometric cut pattern and sits directly on the black band that splits the honey-toned leaf in two, so the two elements read as one detail rather than a handle fixed on afterwards. It's the only strongly decorative element on an otherwise plain surface.
Does the black band move if the door is made taller?
No, its height stays fixed, because the handle needs to sit at a constant working height whatever the leaf size. On a taller door the timber section above the band simply lengthens, so the proportions shift there rather than at the band itself.
Can Kavak be ordered to my own door opening?
Yes. The band height, the handle and the vertical grain stay as designed; the leaf and door frame are resized to your opening and the timber above the band is lengthened or shortened to suit. We take the exact measurement on site before manufacture starts.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.