Product code: ECK-KMP-006composite steel door
Kaytan Vertical-Slatted Timber Composite Steel Door
Kaytan holds a wide timber panel inside an anthracite frame and lays five evenly spaced black slats down it, running from the top of the panel to the bottom.
- Colour
- Ahşap tonu
- Surface finish
- Kompozit
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The vertical slats stretch the leaf. The same panel cut by horizontal slats instead would have lowered and widened it; this door does the opposite, which is why we suggest it for a landing with a low ceiling.
The slats stand slightly proud of the surface, so they cast a shadow. That shadow shifts through the day as the light changes, and the panel reads a little differently in the morning than it does in the evening; a flat printed line pattern wouldn't do that.
Keeping the frame anthracite holds the timber in check and sets the leaf apart from the landing around it. Letting the wood run all the way to the edge would have made the door look bigger, but it wouldn't have looked as orderly.
- Anthracite frame around a wide timber panel
- Five evenly spaced vertical black slats
- Equal spacing between the slats
- Vertical chrome bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-006 |
| Colour | Ahşap tonu |
| Surface finish | Kompozit |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What effect do the vertical slats have on Kaytan's proportions?
The five black slats run top to bottom across the timber panel and stretch the leaf visually, making it look taller than it is. Horizontal slats on the same panel would have had the opposite effect, widening and lowering it, which is why we point this model towards landings with a low ceiling.
Does the pattern on Kaytan look the same all day?
Not quite. The slats stand slightly proud of the timber surface, so they throw a shadow, and that shadow changes as the light moves through the day. A printed line pattern at the same depth wouldn't shift like that; here the panel reads a little differently morning and evening.
Can the slat spacing on Kaytan be changed for my door?
The frame, the panel and the five-slat layout stay as designed; what changes to fit your opening is the leaf and door frame size, with the spacing recalculated so the slats still land evenly from top to bottom. We take the final measurement on site before production starts.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.