Product code: ECK-KMP-001composite steel door
Telkari Chrome-Lined Walnut Composite Steel Door
Telkari sets a dark walnut panel against an anthracite ground and runs horizontal chrome lines straight across it, splitting the panel into five sections and cutting clean through the grain beneath.
- Colour
- Ceviz
- Surface finish
- Kompozit
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.


On-site measurement
The frame opening and the swing direction are settled at your address.

Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.

Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The division earns its keep. A single uninterrupted timber surface would weigh the leaf down; breaking it with horizontal lines makes the same surface read lighter, so the door doesn't look as wide as it is. That difference is felt most on a cramped landing.
The chrome lines sit embedded in the composite facing rather than stuck on as a separate strip. In practice that means no raised edge to collect dust and nothing for a cloth to catch on when wiping the leaf down.
The handle is a black vertical bar set against the anthracite ground, clear of the walnut panel. If a hand met the timber on every opening, that patch would dull faster than the rest; keeping the handle off it avoids that.
- Anthracite ground with a dark walnut centre panel
- Horizontal chrome dividing lines
- Panel split into five sections
- Black vertical bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-001 |
| Colour | Ceviz |
| Surface finish | Kompozit |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Telkari Chrome-Lined Walnut Composite Steel Door?
Telkari sets a dark walnut panel against an anthracite ground and divides it with horizontal chrome lines that run edge to edge, cutting across the grain and breaking the panel into five sections. The lines sit flush in the composite facing rather than fixed on top, so there is no raised edge to catch dust.
Can the Telkari be made to a non-standard opening?
Yes. The walnut panel, the chrome lines and the five-part division stay as they are; only the leaf and door frame are resized to your opening, with the proportions worked out again so the lines still land edge to edge. We confirm the opening with an on-site survey before manufacture starts.
Which product line does the Telkari belong to?
The Telkari is a composite steel door, so the body, insulation and lock hardware follow the same build as every other model in the group; what sets it apart is the walnut-and-chrome surface and the five-way division of the panel. Where your landing is narrow, that broken-up surface is worth asking about specifically.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.