Product code: ECK-PVC-020PVC embossed steel door
Kyanit Angular Wood-Panel PVC Steel Door
Kyanit sets an angular wood-toned area into an anthracite ground and draws fine black lines across it that cross to form triangles.
- Colour
- Ahşap tonu
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The wood area is one geometric shape, and the lines inside it are a second. Layering the two builds a sense of depth that a single flat shape would not achieve on its own.
Keeping the black lines fine matters. Thicker lines would cut the wood area into separate pieces and the shape would be lost; at this weight the area stays whole and the lines read as drawn on top of it.
The handle sits outside the wood area, on the ground itself. Being black and elongated, it stands as a vertical counterweight to the angled edge of the wood area.
The lines inside the wood area are printed into the facing rather than cut by laser. That keeps the surface flat with nothing for dust to catch in, and the lines feel level to the touch.
- Anthracite ground
- Angular wood-toned area
- Fine black lines within the wood area
- Long black vertical handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-020 |
| Colour | Ahşap tonu |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
How is the pattern on the Kyanit door built up?
Kyanit sets an angular wood-toned area into an anthracite ground and draws fine black lines across it that cross to form triangles. The wood shape is one layer of geometry and the lines inside it are a second, and it is the two sitting one over the other that gives the surface its sense of depth.
Will the wood area and its lines resize correctly for a wider door?
Yes. The angular wood area and the lines inside it are redrawn against your own door opening rather than stretched, since an uneven stretch would pull the lines out of true with the angles of the shape around them. Measure the opening from inside the frame and send it over; we take the measurement again on site before fitting.
What group does the Kyanit door belong to?
The Kyanit door sits in the PVC-embossed steel door group alongside a wood-toned surface, a PVC facing, an unglazed single leaf and a marble threshold, all features common to the wider range. The surface pattern is what sets each model apart, and here that means two layers of geometry rather than a single repeating pattern.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.