Product code: ECK-PVT-001pivot door
Eksen Horizontal-Line Anthracite Pivot Door
On Eksen it is light, not pattern, that defines the surface. Fine horizontal channels run across the leaf at even spacing, and as the angle of the sun changes through the day they throw shadows of different depths; a surface that looks almost flat in the morning turns into a lined texture by the afternoon.
- Colour
- Antrasit
- Surface finish
- Lake
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A matt anthracite lacquer carries that effect without overstating it. A narrow full-height pane runs beside the leaf, bringing light inside without opening the entrance up.
Because the leaf itself is unglazed, that strip of glass does two jobs: it lights the hallway and it sets the proportion of the door. A slim vertical gap next to a wide leaf makes the whole thing read lighter than it actually is. A full-height stainless bar handle runs along the leaf, so the grip point stays the same wherever along its height you push.
Where the entrance faces outside weather, we use facing and stainless fittings made for exterior use.
- Fine horizontal-channel matt lacquer surface
- Full-height vertical bar handle
- Narrow full-height side glazing
- Exterior-grade facing
- Spindle sized to the leaf's weight
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-001 |
| Colour | Antrasit |
| Surface finish | Lake |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Eksen model?
Eksen is shaped by light rather than pattern: fine horizontal channels across the leaf throw shadows that deepen or flatten as the sun moves, so the same door looks different at different times of day. A matt anthracite lacquer keeps that effect understated rather than loud.
Can the Eksen door be built to a non-standard opening?
Yes, this is a made-to-order door rather than a stocked size. Whatever the width and height of your opening, the horizontal-channel surface, the full-height bar handle and the side glazing stay the same design; we check the opening again on site, and the spindle is then sized to carry the leaf that results.
Which group does the Eksen door belong to?
Eksen is a pivot door: it turns on a spindle set between a point in the floor and one above, not on hinges, which is what allows a wide unglazed leaf like this one without the sag a hinged door that size would develop. The body, insulation and lock hardware follow the same standard as the rest of the range.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.