Product code: ECK-PVT-003pivot door
Şakul Vertical-Slat Wood-Grain Pivot Door
The idea behind Şakul is simple: the door should not read as something separate from the facade. The vertical slats across the leaf are not an even width, some run wider than others, and that irregularity keeps the surface from looking like a mechanical row of lines.
- Colour
- Ahşap tonu
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Where the same slat language continues onto the slatted facade around it, the boundary of the door almost disappears when it is closed. A honey-toned walnut facing strengthens that effect.
The fine shadow lines between the slats sharpen in daylight and soften under evening facade lighting. The leaf is unglazed; there is no glass in this model.
This is chosen for an entrance that wants privacy, or one where the far side of the door opens straight onto a living space. Because the leaf is wide and heavy, the spindle is sized with a margin well above the leaf's own weight.
- Uneven-width vertical slats
- Continues the facade's slatted finish
- Unglazed leaf
- Long vertical bar handle
- Exterior-grade facing
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-003 |
| Colour | Ahşap tonu |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Şakul model?
Şakul is built from vertical slats of uneven width, so the surface reads as irregular rather than mechanical, and is designed to continue the same slat language used on the slatted facade around it. Closed, the boundary between door and wall is hard to pick out.
Is Şakul produced to match a non-standard opening?
Yes. Şakul is made to order rather than from stock, and the uneven-width vertical slats are redrawn to keep continuing the same rhythm as the slatted facade around them, whatever width the leaf ends up at. We check the facade's slat spacing against the opening on site, and the spindle is then sized to the leaf that results.
Why does a wide slatted leaf need a stronger spindle?
A wide, unglazed leaf carries more weight than an average door, and an undersized spindle shows that strain within the first year through noise as the leaf turns. We size the spindle with a clear margin above the leaf's actual weight rather than to the minimum it would just about carry.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.