Product code: ECK-PVT-006pivot door
Mesnet Brass-Banded Double-Leaf Pivot Door
On Mesnet it is brass that breaks up the black surface. Thin brass strips run between the panel divisions, staying matt through the day and catching warm light once the entrance lighting comes on in the evening.
- Door leaf
- Double leaf
- Glazing
- Yes
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The effect gives a modern leaf something of a classic entrance feel. Full-height panes to either side light the entrance itself rather than the door.
How that glazing is rated and how it seats in the frame matters more here than how it looks: a wide pane of glass, badly specified, becomes the weakest point in the door. Brass develops a patina over time.
We say that plainly as a property of the material rather than a fault: if you want it to keep a bright finish, a lacquered brass is specified, and if you want it to age naturally, uncoated brass is used instead. That decision is made before installation, since changing it afterwards is not straightforward.
- Brass dividers between panels
- Full-height security glazing to each side
- Brass-detailed bar handle
- Double-leaf pivot system
- Exterior-grade facing
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-006 |
| Door leaf | Double leaf |
| Glazing | Yes |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Mesnet model?
Mesnet breaks up a black double-leaf surface with thin brass strips set between the panel divisions, matt through the day and catching warm light once the entrance lamps come on. Full-height glazing to either side lights the entrance itself rather than the leaf.
Is Mesnet made to the size of my own opening?
Yes, Mesnet is produced to order rather than from a stocked size, and the brass dividers between the panels are respaced to suit the new proportions so the black leaf and the glazing either side still read as one composition. The opening and the brass finish are both confirmed again on site before manufacture, since the finish is not easily changed afterwards.
How important is the glazing specification on the Mesnet door?
More than the look of it suggests. A wide pane of glass that is not correctly rated for resistance, or does not seat properly in the frame, becomes the weakest point in an otherwise strong door. We treat the glazing choice on this model with the same weight as the lock itself.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.