Product code: ECK-KMP-011composite steel door
Pirit Crossed-Line Composite Steel Door
Pirit draws fine chrome diagonals across an anthracite panel; the lines cross one another and run the full height of the leaf. A light grey vertical band sits on the left, and the handle is set on it.
- Colour
- Antrasit
- Surface finish
- Kompozit
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The crossing points aren't evenly spaced; they bunch more tightly towards the top. That bunching lengthens the leaf and pulls the eye upward; a regular lattice spread evenly across the surface wouldn't have had that effect, it would simply have filled it.
The chrome lines don't stand proud of the surface; they're worked into the facing rather than raised. Run a finger across and it feels flat, which also means the leaf wipes clean easily.
The grey band sits outside the crossed lines and carries the handle. Put the handle inside the pattern instead and it would have cut across the lines, and the constant touch of a hand would have dulled that one spot over time.
The direction the crossings bunch towards can be reversed. Bunching upward lengthens the leaf, as described; bunching downward instead pulls the visual weight lower, and that version is picked for entrances with a low ceiling.
- Anthracite panel with a light grey left-hand band
- Fine chrome diagonal lines
- Crossed-line composition
- Vertical chrome bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-011 |
| Colour | Antrasit |
| Surface finish | Kompozit |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why do the crossed lines on Pirit bunch towards the top?
The crossing points are spaced more tightly near the top of the leaf, and that density pulls the eye upward and makes the door look taller than it is. An evenly spaced lattice across the whole surface wouldn't give that lengthening effect, it would just fill the panel.
Is Pirit available for a non-standard door opening?
Yes, Pirit is produced against your own opening rather than from a catalogue size, and the crossed chrome lines are redrawn at the new scale so the crossing points keep the same density and still pull the eye the way they are meant to. Measure the opening from inside the frame and we check it again on site before fitting.
Is the chrome pattern on Pirit raised or flat to the touch?
Flat. The lines are worked into the composite facing rather than sitting proud of it, so there's no ridge for dust to collect in and the surface wipes clean in one go. The grey band carrying the handle sits outside the pattern, so a hand never crosses the lines themselves.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.