Product code: ECK-OZP-004one-off project door
Şimşir Slatted Fixed-Panel Project Door
Şimşir places a fixed panel of vertical timber slats beside an anthracite leaf. There are gaps between the slats; the panel is not fully closed.
- Colour
- Antrasit
- Hardware
- Bar kulp, Mermer eşik, Krom detay
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The slatted panel's job is light and air: even with the door shut, light reaches through the gaps and the entrance never feels fully sealed. This layout is favoured in the in-between spaces that sit between an apartment building entrance and the individual flat.
The gap between slats is set to the measurement of the project. A narrow gap gives a more closed look and less light; a wide gap does the opposite. At survey we look at what sits behind the panel and recommend the gap on that basis.
A single timber frame wraps round both leaf and panel together. Were they set in two separate frames, the entrance would read as two pieces; the single frame turns them into one opening.
- Timber frame
- Anthracite leaf
- Fixed panel of vertical timber slats
- Long chrome bar handle
- Produced to the opening measurement
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OZP-004 |
| Colour | Antrasit |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Şimşir Slatted Fixed-Panel Project Door?
Şimşir places a fixed panel of vertical timber slats beside an anthracite leaf, with gaps left between the slats so the panel is not fully closed. Light and air pass through even with the door shut, which is why this layout is favoured in the space between a building entrance and a flat.
Can the Şimşir Slatted Fixed-Panel Project Door be made to a custom size?
This model is not kept to a stock size; it is produced to match the measurement of your door opening. Where your opening is non-standard, the slatted timber panel, the anthracite leaf and the single wrap-round frame carry over, and the slat gap is set to suit the project at survey.
Which group does the Şimşir Slatted Fixed-Panel Project Door belong to?
Şimşir sits in the one-off project door group, finished in anthracite with a bar handle, a marble threshold and chrome detailing. The body, insulation and lock hardware are shared across the whole catalogue; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.