Product code: ECK-OZP-005one-off project door
Zülfe Oval-Medallion Walnut Project Door
Zülfe sets an oval medallion relief at the centre of a walnut surface; the medallion is wrapped in a baroque frame that spreads across the whole of the leaf.
- Colour
- Ceviz
- Surface texture
- Kabartma
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A knocker sits at the centre of the medallion. This is a familiar placement in a classical door layout: the knocker sits at the focal point of the ornament and becomes the centre of the composition.
The depth of the relief reads clearly against the walnut tone. On a pale surface the same relief would throw no shadow and the pattern would flatten out; the dark tone is what makes this workmanship visible.
In the project range, classical models of this kind are usually asked for by older, restored facades. Where the opening measurement is non-standard, the leaf is produced to that measurement without any compromise on the classical look.
The medallion relief is produced from a die rather than worked by hand. That keeps the depth identical on every leaf; a hand-worked surface would never come out exactly the same twice.
- Walnut timber surface
- Oval medallion relief
- Baroque relief frame
- Chrome knocker
- Single leaf, no glazing
- Produced to the opening measurement
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OZP-005 |
| Colour | Ceviz |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Zülfe Oval-Medallion Walnut Project Door?
Zülfe sets an oval medallion relief at the centre of a walnut surface, wrapped in a baroque frame that spreads across the whole leaf. A knocker sits at the centre of the medallion, a familiar placement in classical door layouts where the ornament's focal point becomes the centre of the composition.
Can the Zülfe Oval-Medallion Walnut Project Door be made to a custom size?
This model is not kept to a stock size; it is produced to match the measurement of your door opening. Where your opening is non-standard, the walnut surface, the medallion relief and the baroque frame carry over and the leaf is built to that measurement without compromise on the classical look, once we've confirmed it again on site.
Which group does the Zülfe Oval-Medallion Walnut Project Door belong to?
Zülfe sits in the one-off project door group, finished in walnut with relief work, a single leaf, no glazing and chrome detailing. The body, insulation and lock hardware are shared across the whole catalogue; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.