Product code: ECK-KMP-007composite steel door
Mizan Horizontal-Strip Composite Steel Door
Mizan runs four horizontal chrome strips across an anthracite leaf and crosses them with a vertical black band, so the two directions meet on the same surface.
- Colour
- Antrasit
- Surface finish
- Kompozit
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The crossing point isn't dead centre; it sits slightly to the left. That shift is what balances the composition: centred exactly, the leaf would have looked symmetrical but static. Think of a set of scales with the weight off true centre; the balance here is built the same way.
The horizontal strips widen the leaf to the eye, and the vertical band pulls against that. Together they leave the leaf's own proportions alone rather than stretching or widening it.
The handle is long, black and vertical, set just to the left of the band. Because it reads as a continuation of the band rather than a separate element, it doesn't stand out on its own.
The crossing point isn't fixed from one width to the next; as the leaf gets wider, the point moves back towards the centre and the balance holds. That's why the same model looks right whatever width the opening calls for.
- Anthracite-grey composite surface
- Four horizontal chrome strips
- Vertical black band at the crossing point
- Long black vertical handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-007 |
| Colour | Antrasit |
| Surface finish | Kompozit |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why does the crossing point on Mizan sit off-centre?
Placing it dead centre would have made the leaf symmetrical but static; moving it slightly left gives the composition a sense of balance instead, the way a loaded scale settles away from true centre. The horizontal strips widen the leaf to the eye and the vertical band works against that, leaving the leaf's own proportions unchanged.
Does the crossing point move if I order a wider door?
Yes. The point isn't fixed at one spot; it's set as a proportion of the leaf, so on a wider door it shifts back towards the centre and the balance holds. That's handled at the measurement stage, once we've confirmed the exact width of your opening on site.
Is Mizan built the same way as the other composite models?
The body, insulation and lock hardware are the same across the composite range; what's specific to Mizan is the crossed strip-and-band pattern and its off-centre balance. If your landing is narrow, that balance is worth seeing in person, since photographs tend to flatten it.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.