Product code: ECK-PVC-019PVC embossed steel door
Hematit Gloss Black Batten PVC Steel Door
Hematit sets vertical wood battens into the right half of a gloss black leaf, spaced apart so the black surface shows through the gaps between them.
- Colour
- Siyah
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The gloss black surface reflects light; the wood battens do not. That contrast keeps the two materials visually apart, so the battens read as sitting proud of the surface rather than printed onto it.
Keeping the battens on the right leaves the left half clear for the handle. A hand never has to reach past a batten, and because the gaps between battens collect dust, confining them to one half keeps the amount of fiddly cleaning down.
A gloss surface shows fingermarks and dust more readily than a matt one. Half the leaf being covered in battens reduces the flat area that needs wiping, so in practice the maintenance is concentrated on the other half.
The gap left between each batten is not fixed. A narrow gap all but hides the black ground behind it; a wide one turns the gap itself into part of the pattern, which is the wider setting chosen for this model.
- Gloss black PVC facing
- Vertical wood battens on the right
- Battens set with gaps between them
- Long chrome bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-019 |
| Colour | Siyah |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What is distinctive about the surface of the Hematit door?
The Hematit leaf is finished in gloss black with a row of vertical wood battens set into the right half, spaced so the black ground shows through the gaps. Gloss reflects light and wood does not, and that contrast is what keeps the battens reading as a separate, raised element rather than a printed pattern.
Can the Hematit door be built to a non-standard opening?
Yes. Hematit is produced to the size of your door opening rather than pulled from stock, and the gloss black facing, the spaced wood battens and the long chrome handle are carried through at whatever width results. Measure the opening from inside the frame and send it over; the team takes the measurement again on site before the leaf is made.
Which group is the Hematit door part of?
Hematit is part of the PVC-embossed steel door group, with a black surface, a PVC facing, an unglazed single leaf and a bar handle in common with the rest of the line. What changes model to model is the surface treatment; here it is a gloss-and-batten combination rather than a single flat colour or a laser-etched pattern.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.