Product code: ECK-KMP-010composite steel door
Hünnap Glass-Banded Timber Composite Steel Door
Hünnap divides the leaf into three vertical strips that all run the full height: a black glass band on the left, a timber panel in the middle, and vertical black slats on the right.
- Colour
- Ahşap tonu
- Surface finish
- Kompozit
- Glazing
- Yes
- Hardware
- Bar kulp, Mermer eşik, Krom detay
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The glass band on the left isn't there for light, it's there for balance; because it's narrow and dark, it doesn't show the inside of the flat from the landing. That makes it useful on an entrance that wants some privacy without going fully closed.
The slats on the right are the glass band's counterpart: one strip void, one solid. Together they flank the timber panel in the middle and keep the leaf's weight sitting centrally.
The light timber tone acts as the go-between for the three strips. A darker timber would have blurred the three sections into each other and lost the distinction between them.
The width of the black glass band can be changed. A wider band brings more light into the entrance but gives up some privacy, and a narrower one does the reverse; we look at where the door sits relative to the street at the survey and suggest accordingly.
- Light timber composite surface
- Vertical black glass band on the left
- Vertical black slats on the right
- Vertical chrome bar handle
- Three-strip composition
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-010 |
| Colour | Ahşap tonu |
| Surface finish | Kompozit |
| Glazing | Yes |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Does the glass band on Hünnap let people see into the hallway?
No. The band is kept narrow and dark on purpose, which stops it showing the inside of the flat from the landing while still breaking up the leaf visually. It's there to balance the composition against the slats on the opposite side, not to bring in light.
Can Hünnap be made to a non-standard opening?
Yes. Hünnap is resized to your own door opening rather than taken from a stock run, and the three-strip composition, the glass band, the timber centre and the slats, is redrawn in the same proportions so none of the three strips ends up wider or narrower than the others. We confirm the opening on site before manufacture starts.
What group does Hünnap belong to, and what carries over from it?
Hünnap is a composite steel door, so the body, insulation and lock hardware match every other model in that group; the three-strip layout of glass, timber and slats is what sets this particular model apart. The light timber tone is chosen deliberately to keep all three strips reading as distinct.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.