Product code: ECK-KMP-008composite steel door
Katran Black-Framed Slatted Composite Steel Door
Katran holds a timber panel inside a black frame and splits the centre of that panel with vertical slats in the same black tone, so the timber sits caught between the two.
- Colour
- Siyah
- Surface finish
- Kompozit
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The black frame cuts a sharp line between the leaf and the landing. An anthracite frame would meet the wall more softly; black does the opposite and makes the door read as an object in its own right, an effect that's more obvious on a pale landing.
The slats only run across the middle of the panel, not the whole height. Top and bottom are left as plain timber, and that gap stops the pattern feeling cramped while leaving room for the grain to show through.
The chrome handle sits on the black frame, clear of the slats. Because it's the one bright element in the composition, where the door opens is never in doubt.
- Black frame
- Timber centre panel
- Vertical black slats
- Vertical chrome bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-KMP-008 |
| Colour | Siyah |
| Surface finish | Kompozit |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why is the frame on Katran black rather than anthracite?
Black cuts a harder line between the leaf and the wall than anthracite would, so the door reads as its own object rather than blending into the landing. That contrast is strongest on a pale landing, where the black frame stands out clearly against the surrounding wall.
Why don't the slats cover the whole timber panel on Katran?
The slats sit across the middle section only, leaving the top and bottom in plain timber. That gap keeps the pattern from feeling crowded and leaves room for the grain itself to show, rather than covering the whole surface with the same repeating slat.
Can Katran be made to measure for my door opening?
Yes. The black frame, the timber panel and the slat layout are kept as designed; the leaf and door frame dimensions are reworked to your opening and the panel is repositioned within the frame to hold the same proportions. We confirm the final size with an on-site survey.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.