Product code: ECK-OZP-003one-off project door
Keten Linen-Patterned Timber-Panelled Project Door
Keten sets a black leaf into a line-patterned timber wall panel. The fine lines on the panel continue on round the door.
- Colour
- Ahşap tonu
- Hardware
- Bar kulp, Mermer eşik, Krom detay
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The design decision here is not to hide the door but to add it to the panel. Because the lines break at the edge of the leaf, the door still reads clearly as a door, but door and panel become part of the same composition.
The most common mistake on project doors is leaving the frame as an afterthought. A frame fitted after the wall finish is complete does not sit flush with it; on this kind of job we set the frame in place before the wall finish goes up.
The tonal gap between the black leaf and the timber panel is wide. That contrast keeps the door's position clear, which matters in entrances where a guest needs to know at a glance where to head.
- Line-patterned timber wall panel
- Black leaf
- Long chrome bar handle
- Frame set flush with the wall
- Produced to the opening measurement
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-OZP-003 |
| Colour | Ahşap tonu |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Keten Linen-Patterned Timber-Panelled Project Door?
Keten sets a black leaf into a line-patterned timber wall panel, with the fine lines on the panel continuing round the door. The design decision is not to hide the door but to add it to the panel, so door and wall read as one composition while the leaf still stays clearly a door.
Can the Keten Linen-Patterned Timber-Panelled Project Door be made to a custom size?
This model is not kept to a stock size; it is produced to match the measurement of your door opening. Where your opening is non-standard, the line-patterned timber panel, the black leaf and the long chrome handle carry over and the door is built to that measurement. Send the width and height taken from inside the frame; we confirm them again on site before manufacture begins.
Which group does the Keten Linen-Patterned Timber-Panelled Project Door belong to?
Keten sits in the one-off project door group, finished in a timber tone with a bar handle, a marble threshold and chrome detailing. The body, insulation and lock hardware are shared across the whole catalogue; what changes from one model to the next is the surface design, the facing and the leaf layout.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.