Product code: ECK-PVT-005pivot door
Kule Double-Leaf Matt Black Pivot Door
Kule is built for entrances a single leaf cannot cover. The two leaves turn on separate spindles, and each one carries its own weight down to its own point in the floor; a double leaf here is not one wide leaf split in half, it is two independent pivot systems side by side.
- Colour
- Siyah
- Door leaf
- Double leaf
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
Wide panel divisions across both leaves give the surface a sense of scale. Without them, a run of matt black this size loses any human reference point; the panel lines give the eye something to measure the door against.
Day to day, usually only one leaf opens, and the second stays in reserve for moving furniture through or receiving a large group. The lock arrangement is built so both leaves can stand fixed open or closed together when needed.
Set against a textured stone facade, the flat, matt black surface works as the quieter element in the pairing rather than competing with it.
- Twin independent pivot leaves
- Full-height bar handle on each leaf
- Wide panel divisions
- Unglazed leaves
- Separate spindle calculation per leaf
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-005 |
| Colour | Siyah |
| Door leaf | Double leaf |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Kule model?
Kule is a double-leaf pivot door built for openings too wide for one leaf: each leaf turns on its own spindle and carries its own weight to its own point in the floor, so it behaves as two independent pivot doors rather than one leaf split in two.
Can the Kule double-leaf door be built to a non-standard opening?
Yes. Each leaf of Kule is sized to its own opening rather than taken from stock, and the panel divisions are respaced so the matt black surface keeps the same sense of scale whatever width the pair ends up at. We check both sides of the opening again on site, and both spindles are then calculated separately for the leaves that result.
Why does the Kule door carry wide panel divisions?
A flat run of matt black at this width loses any sense of scale without a reference point, so the panel lines are there to give the eye something to measure the leaf against. It is a visual decision rather than a structural one, chosen for the width this model is built at.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.