Product code: ECK-LMK-007Laminoks steel door
Mürver Black-Framed Timber Laminoks Steel Door
Mürver sets a horizontally lined, light timber panel inside a black frame, with a black vertical strip along the left edge joining the panel to the frame.
- Colour
- Siyah
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The contrast between black and light timber is the sharpest in the range. An anthracite frame would soften that transition; black instead throws the timber forward and draws a clean line around the edge of the leaf.
The strip at the left edge carries the handle and also builds a buffer between the frame and the panel. Without it, the handle would land directly on the timber, and hand contact there would dull that patch of surface over time.
The horizontal lines stay inside the panel and never cross into the frame. That boundary keeps the leaf looking ordered, with no doubt about where the texture starts and stops.
- Black frame
- Light timber horizontal-line panel
- Black vertical strip at left edge
- Long black vertical handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-007 |
| Colour | Siyah |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Mürver Black-Framed Timber Laminoks Steel Door?
Mürver sets a horizontally lined, light timber panel inside a black frame, with a black vertical strip along the left edge joining the two. Black against light timber is the sharpest contrast in the range; an anthracite frame would soften that transition, while black pushes the timber forward and draws a clean line around the leaf.
Can the Mürver Black-Framed Timber Laminoks Steel Door be made to measure?
Mürver is prepared to a standard frame opening as stock. For a different opening the same black frame, timber panel and left-edge strip are kept and the leaf is made to measure. Send the width and height taken from inside the frame; the opening is checked again on site before fitting.
Which group does the Mürver Black-Framed Timber Laminoks Steel Door belong to?
Mürver belongs to the Laminoks steel door group, finished in black with a single unglazed leaf and a long black handle. Body, insulation and lock hardware are shared across the range, and the facing layout is what tells one model from the next, so judge it against your landing's light and the width of the opening.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.