Product code: ECK-LMK-005Laminoks steel door
Muşmula Wide Timber Panel Laminoks Steel Door
Muşmula sets a wide walnut panel inside an anthracite frame and divides that panel with evenly spaced horizontal lines. The timber carries most of the leaf, with anthracite kept to the border.
- Colour
- Ahşap tonu
- Surface finish
- Laminoks
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
A panel this large is not the usual layout in the Laminoks range, where most models use timber as a narrow band rather than the whole field. Here the timber is the ground itself and the anthracite is reduced to an edge.
The horizontal lines break up the width of the panel. Left without them, a walnut surface this size would sit heavy as one flat block; the division lightens it and brings the direction of the grain into view.
The black handle sits at the left edge, exactly where the frame meets the panel. It touches both the timber and the anthracite, the one element in the composition that marks the join between the two materials.
The grain of the wide timber panel is set running vertically, because that is what makes the division visible; laid horizontally on a panel this size it would shorten the leaf and throw off the proportion.
- Anthracite frame
- Wide walnut Laminoks panel
- Horizontal dividing lines
- Long black vertical handle
- Single leaf, unglazed
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-LMK-005 |
| Colour | Ahşap tonu |
| Surface finish | Laminoks |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What kind of door is the Muşmula Wide Timber Panel Laminoks Steel Door?
Muşmula sets a wide walnut panel inside an anthracite frame and splits that panel with evenly spaced horizontal lines. Most Laminoks models use timber as a narrow band; here the walnut carries the whole field and the anthracite is pushed back to the edge, which is what sets this model apart.
Can the Muşmula Wide Timber Panel Laminoks Steel Door be made to measure?
Muşmula is prepared to a standard frame opening as stock. For a different opening it is made to measure with the same anthracite frame, walnut panel and horizontal lines kept in place. Send the width and height taken from inside the frame; the opening is measured again on site before fitting.
Which group does the Muşmula Wide Timber Panel Laminoks Steel Door belong to?
Muşmula sits in the Laminoks steel door group, in a timber tone with a single unglazed leaf and a long black handle. Body, insulation and lock hardware stay common across the range, while the facing layout is the point of difference, so weigh the light on your landing and the width of the entrance.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.